BACK DOOR REASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • A bolt without a torque specification is shown in the standard bolt chart.

    Click here

PROCEDURE


  1. INSTALL CUSHION


    1. Install the cushion.

      Tech Tips

      Use the same procedure as for the LH side.

  2. INSTALL BACK DOOR LOWER STOPPER LH


    1. When replacing the bolt with a new one:


      1. Clean the threaded portion on the vehicle body with non-residue solvent.

    2. When reusing the back door stay bolt:


      1. Clean the threaded portion on the vehicle body with non-residue solvent.

      2. Apply adhesive to the threads of the bolt.

        Adhesive
        Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent

    3. Install the bolt to the back door lower stopper LH.

  3. INSTALL BACK DOOR LOWER STOPPER

    Tech Tips

    Use the same procedure as for the LH side.

  4. INSTALL BACK DOOR WEIGHT


    1. Attach the guide to install the back door weight.

    2. Install the 3 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

  5. INSTALL REAR WIPER MOTOR ASSEMBLY

    Click here

  6. INSTALL BACK DOOR LOCK ASSEMBLY (w/ Power Back Door)

    Click here

  7. INSTALL BACK DOOR LOCK ASSEMBLY (w/o Power Back Door)

    Click here

  8. INSTALL POWER BACK DOOR WARNING BUZZER (w/ Power Back Door)

    Click here

  9. INSTALL REAR NO. 3 SPEAKER ASSEMBLY (w/ Back Door Speaker)

    Click here

  10. INSTALL MULTIPLEX NETWORK DOOR ECU (w/ Power Back Door)

    Click here

  11. INSTALL REAR TELEVISION CAMERA ASSEMBLY (w/ Parking Assist Monitor System)

    Click here

  12. INSTALL LICENSE PLATE LIGHT ASSEMBLY LH

    Click here

  13. INSTALL LICENSE PLATE LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  14. INSTALL BACK DOOR OPENER SWITCH ASSEMBLY

    Click here

  15. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

    Click here

  16. INSTALL REAR LIGHT ASSEMBLY LH

    Click here

  17. INSTALL REAR LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  18. INSTALL REAR WASHER NOZZLE

    Click here

  19. INSTALL REAR SPOILER ASSEMBLY

    Click here

  20. INSTALL POWER BACK DOOR SENSOR ASSEMBLY LH (w/ Power Back Door)

    Click here

  21. INSTALL POWER BACK DOOR SENSOR ASSEMBLY RH (w/ Power Back Door)

    Tech Tips

    Use the same procedure as for the LH side.

  22. INSTALL NO. 1 AMPLIFIER ANTENNA ASSEMBLY

    Click here

  23. INSTALL BACK DOOR TRIM BOARD ASSEMBLY


    1. B002JR7C01
      *A w/ Woofer
      *B w/o Woofer

      Attach the 14 clips to install the back door trim board assembly.

  24. INSTALL BACK DOOR LOCK COVER (w/ Power Back Door)


    1. Clean the back door panel surface.


      1. Remove the double-sided tape from the rear door panel surface.

      2. Wipe off any tape adhesive residue with cleaner.

    2. Install a new back door lock cover.


      1. Remove the peeling paper from the face of the back door lock cover.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      2. B002I9UC04
        *1 Double-sided tape

        Attach the 4 claws to install the back door lock cover.

        Tech Tips

        Press the back door lock cover firmly to install it.

  25. INSTALL BACK DOOR LOCK COVER (w/o Power Back Door)


    1. Clean the back door panel surface.


      1. Remove the double-sided tape from the rear door panel surface.

      2. Wipe off any tape adhesive residue with cleaner.

    2. Install a new back door lock cover.


      1. Remove the peeling paper from the face of the back door lock cover.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      2. B002I8SC06
        *1 Double-sided tape

        Attach the 4 claws to install the back door lock cover.

        Tech Tips

        Press the back door lock cover firmly to install it.

  26. INSTALL BACK DOOR TRIM BASE (w/ Power Back Door)


    1. Attach the 2 guides and 2 claws to install the back door trim base.

  27. INSTALL DOOR CONTROL SWITCH (w/ Power Back Door)

    Click here

  28. INSTALL BACK DOOR CONTROL SWITCH (w/ Power Back Door)

    Click here

  29. INSTALL PULL HANDLE (w/ Power Back Door)


    1. Connect the connector.

    2. Attach the 6 claws to install the pull handle.

  30. INSTALL BACK DOOR FINISH COVER LH (w/o Power Back Door)


    1. Attach the 6 claws to install the back door finish cover LH.

  31. INSTALL BACK DOOR FINISH COVER RH (w/o Power Back Door)

    Tech Tips

    Use the same procedure as for the LH side.

  32. INSTALL BACK DOOR SIDE GARNISH LH


    1. Attach the 2 guides.

    2. Attach the claw and 2 clips to install the back door side garnish LH.

    3. B002KCBC03
      *1 Pin

      Attach the pin to install the clip as shown in the illustration.

  33. INSTALL BACK DOOR SIDE GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

  34. INSTALL BACK DOOR CENTER GARNISH


    1. Attach the 2 guides and 5 claws to install the back door center garnish.

  35. INSTALL REAR WIPER MOTOR GROMMET

    Click here

  36. INSTALL REAR WIPER ARM AND BLADE ASSEMBLY

    Click here

  37. INSTALL REAR WIPER ARM HEAD CAP

    Click here

  38. INSPECT POWER BACK DOOR SYSTEM (w/ Power Back Door)

    Click here

  39. ADJUST REAR TELEVISION CAMERA ASSEMBLY


    1. w/ Parking Assist Monitor System:

      Click here

    2. w/ Panoramic View Monitor System:

      Click here