RELAY ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT FRONT WIPER DEICER RELAY


    1. A01COSPC13

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Auxiliary battery voltage is not applied between terminals 1 and 2 10 kΩ or higher
      Auxiliary battery voltage is applied between terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the front wiper deicer relay.

  2. INSPECT DEFOGGER RELAY

    A01CO0V

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 4 Auxiliary battery voltage is not applied between terminals 1 and 2 Below 1 Ω
      Auxiliary battery voltage is applied between terminals 1 and 2 10 kΩ or higher
      3 - 5 Auxiliary battery voltage is not applied between terminals 1 and 2 10 kΩ or higher
      Auxiliary battery voltage is applied between terminals 1 and 2 Below 1 Ω
      4 - 5 Always 10 kΩ or higher

      If the result is not as specified, replace the defogger relay.