COMBINATION SWITCH REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE DOOR SCUFF PLATE ASSEMBLY RH (for RHD)

    Click here

  2. REMOVE COWL SIDE TRIM BOARD RH (for RHD)

    Click here

  3. REMOVE CONSOLE ARMREST ASSEMBLY

    Click here

  4. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH

    Click here

  5. REMOVE INSTRUMENT SIDE PANEL LH

    Click here

  6. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  7. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  8. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

  9. REMOVE COMBINATION SWITCH ASSEMBLY (for Upper Side)


    1. B002KO5C01
      *1 Protective Tape

      Using a screwdriver, detach the 4 claws and remove the combination switch assembly.

      Tech Tips

      Tape the screwdriver tip before use.

  10. REMOVE NO. 2 COMBINATION SWITCH ASSEMBLY (for Lower Side)


    1. B002KVRC01
      *1 Protective Tape

      Using a screwdriver, detach the 4 claws and remove the No. 2 combination switch assembly.

      Tech Tips

      Tape the screwdriver tip before use.