ROOF SUNSHADE REMOVAL

PROCEDURE

1. PRECAUTION

   Note

   After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery terminal notice before proceeding with work.

   Click here

2. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY (w/ Spare Tire)

   Click here

3. REMOVE REAR DECK FLOOR BOX (w/ Spare Tire)

   Click here

4. REMOVE DECK FLOOR BOX LH (w/ Spare Tire)

   Click here

5. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

   CAUTION:

   Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

   Click here

6. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY LH

   Click here

7. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY RH

   Tech Tips

   Use the same procedure described for the LH side.

8. REMOVE REAR SIDE RAIL SPACER LH

   Click here

9. REMOVE REAR SIDE RAIL SPACER RH

   Tech Tips

   Use the same procedure described for the LH side.

10. REMOVE SUNSHADE HOUSING ASSEMBLY

    
    

    1. Detach the 2 clamps.

    2. Remove the 4 bolts, 7 nuts and sunshade housing assembly.