ROOF HEADLINING DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE CHILD RESTRAINT SEAT TETHER ANCHOR COVER (for Type B)


    1. B002IKF

      Detach the 2 claws, 2 guides and remove the child restraint seat tether anchor cover.

  2. REMOVE VANITY LIGHT ASSEMBLY

    Tech Tips

    Use the same procedure for both vanity light assemblies.


    1. B002I07C04
      *1 Bulb Holder
      *a Claw A
      *b Claw B

      Detach the 2 claws A and separate the bulb holder from the vanity light assembly as shown in the illustration.

    2. Detach the claw B and remove the vanity light assembly.

  3. REMOVE TELEPHONE MICROPHONE ASSEMBLY

    Click here

  4. REMOVE NO. 1 MICROPHONE CASE


    1. B002JFE

      Detach the claw.

    2. Detach the guide and remove the No. 1 microphone case.

  5. REMOVE NO. 1 ROOF SILENCER PAD (for Normal Roof)


    1. B002JA2

      Remove the No. 1 roof silencer pad.

  6. REMOVE NO. 2 ROOF SILENCER PAD (for Normal Roof)


    1. B002L38

      for Type A:

      Remove the 2 No. 2 roof silencer pads.

    2. B002IH0

      for Type B:

      Remove the 2 No. 2 roof silencer pads.

  7. REMOVE NO. 3 ROOF SILENCER PAD (for Normal Roof)


    1. B002K73

      Remove the 2 No. 3 roof silencer pads.

  8. REMOVE REAR ROOF SILENCER PAD (for Normal Roof)


    1. B002H29

      Remove the rear roof silencer pad.

  9. REMOVE REAR ROOF SILENCER PAD (for Sliding Roof)


    1. B002I8E

      Remove the rear roof silencer pad.

  10. REMOVE NO. 4 ROOF SILENCER PAD (for Normal Roof)


    1. B002I37

      Remove the No. 4 roof silencer pad.

  11. REMOVE ROOF HEADLINING PAD (for Normal Roof)


    1. B002JU2

      Remove the 2 roof headlining pads.

  12. REMOVE ROOF HEADLINING PAD (for Sliding Roof)


    1. B002KV6

      Remove the 2 roof headlining pads.

  13. REMOVE ROOF HEADLINING PAD (for Glass Roof)


    1. B002K0O

      Remove the 2 roof headlining pads.

  14. REMOVE FRONT ROOF HEADLINING SIDE PAD (for Normal Roof)


    1. B002ISX

      Remove the 2 front roof headlining side pads.

  15. REMOVE ROOF HEADLINING END PAD (for Normal Roof)


    1. B002L2O

      Remove the 2 roof headlining end pads.

  16. REMOVE ROOF HEADLINING END PAD (for Sliding Roof)


    1. B002KQB

      Remove the 2 roof headlining end pads.

  17. REMOVE ROOF HEADLINING END PAD (for Glass Roof)


    1. B002JOO

      Remove the 2 roof headlining end pads.

  18. REMOVE NO. 2 ROOF HEADLINING SUPPORT (for Normal Roof, for Type B)


    1. B002KQM

      Remove the No. 2 roof headlining support.

  19. REMOVE ROOF HEADLINING SUPPORT (for Normal Roof, for Type B)


    1. B002K93

      Remove the No. 2 roof headlining support.

  20. REMOVE NO. 1 ROOF WIRE (for Normal Roof)


    1. for LHD:


      1. B002ICG

        Turn the visor connectors approximately 90° counterclockwise and remove them from the roof headlining.

      2. Remove each piece of tape and the No. 1 roof wire from the roof headlining.

        B002KM8C01
        *A w/o Lane Departure Alert System *B w/ Lane Departure Alert System
        *C w/ Rain Sensor - -
        *1 No. 1 Roof Wire - -
        B002JLO Tape - -

      3. Remove the butyl tape remaining on the roof headlining.

    2. for RHD:


      1. B002ICG

        Turn the visor connectors approximately 90° counterclockwise and remove them from the roof headlining.

      2. Remove each piece of tape and the No. 1 roof wire from the roof headlining.

        B002JRKC01
        *A w/o Lane Departure Alert System *B w/ Lane Departure Alert System
        *C w/ Rain Sensor - -
        *1 No. 1 Roof Wire - -
        B002JLO Tape - -

      3. Remove the butyl tape remaining on the roof headlining.

  21. REMOVE NO. 1 ROOF WIRE (for Sliding Roof)


    1. for LHD:


      1. B002ICG

        Turn the visor connectors approximately 90° counterclockwise and remove them from the roof headlining.

      2. Remove each piece of tape and the No. 1 roof wire from the roof headlining.

        B002JD4C01
        *A w/o Lane Departure Alert System *B w/ Lane Departure Alert System
        *C w/ Rain Sensor - -
        *1 No. 1 Roof Wire - -
        B002JLO Tape - -

      3. Remove the butyl tape remaining on the roof headlining.

    2. for RHD:


      1. B002ICG

        Turn the visor connectors approximately 90° counterclockwise and remove them from the roof headlining.

      2. Remove each piece of tape and the No. 1 roof wire from the roof headlining.

        B002JXLC01
        *A w/o Lane Departure Alert System *B w/ Lane Departure Alert System
        *C w/ Rain Sensor - -
        *1 No. 1 Roof Wire - -
        B002JLO Tape - -

      3. Remove the butyl tape remaining on the roof headlining.

  22. REMOVE NO. 1 ROOF WIRE (for Glass Roof)


    1. for LHD:


      1. B002ICG

        Turn the visor connectors approximately 90° counterclockwise and remove them from the roof headlining.

      2. Remove each piece of tape and the No. 1 roof wire from the roof headlining.

        B002JCNC01
        *A w/o Lane Departure Alert System *B w/ Lane Departure Alert System
        *C w/ Rain Sensor - -
        *1 No. 1 Roof Wire - -
        B002JLO Tape - -

      3. Remove the butyl tape remaining on the roof headlining.

    2. for RHD:


      1. B002ICG

        Turn the visor connectors approximately 90° counterclockwise and remove them from the roof headlining.

      2. Remove each piece of tape and the No. 1 roof wire from the roof headlining.

        B002KM7C01
        *A w/o Lane Departure Alert System *B w/ Lane Departure Alert System
        *C w/ Rain Sensor - -
        *1 No. 1 Roof Wire - -
        B002JLO Tape - -

      3. Remove the butyl tape remaining on the roof headlining.

  23. REMOVE NO. 4 ROOF HEADLINING SUPPORT (for Normal Roof, for Type B)


    1. B002J8I

      Remove the No. 4 roof headlining support.

  24. REMOVE NO. 3 ROOF HEADLINING SUPPORT (for Normal Roof, for Type B)


    1. B002JRB

      Remove the No. 3 roof headlining support.

  25. REMOVE NO. 4 ROOF HEADLINING SUPPORT (for Sliding Roof, for Type B)


    1. B002JT3

      Remove the No. 4 roof headlining support.

  26. REMOVE NO. 3 ROOF HEADLINING SUPPORT (for Sliding Roof, for Type B)


    1. B002KB4

      Remove the No. 3 roof headlining support.

  27. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY

    Click here