UPPER INSTRUMENT PANEL DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY


    1. B002K8NC06
      *a Screw <A> or <B>

      Remove the 3 screws <A> or <B> and No. 1 heater to register duct sub-assembly.

  2. REMOVE NO. 2 HEATER TO REGISTER DUCT SUB-ASSEMBLY


    1. B002H5XC02
      *a Screw <A> or <B>

      Remove the 3 screws <A> or <B> and No. 2 heater to register duct sub-assembly.

  3. REMOVE DEFROSTER NOZZLE ASSEMBLY


    1. B002KY5C02
      *a Screw <A> or <B>

      Remove the 3 screws <A> or <B> and defroster nozzle assembly.

  4. REMOVE METER HOOD SET BRACKET


    1. B002IH7C01
      *a Screw <A> or <B>

      Detach the clamp.

    2. Remove the 3 screws <A> or <B> and meter hood set bracket.

  5. REMOVE NO. 2 DEFROSTER NOZZLE GARNISH


    1. B002IKM

      Detach the 6 claws and remove the No. 2 defroster nozzle garnish.

  6. REMOVE NO. 1 DEFROSTER NOZZLE GARNISH


    1. B002JAE

      Detach the 6 claws and remove the No. 1 defroster nozzle garnish.

  7. REMOVE SIDE DEFROSTER NOZZLE LH


    1. B002L0H

      Detach the 4 claws and remove the side defroster nozzle LH.

  8. REMOVE SIDE DEFROSTER NOZZLE RH


    1. B002KNN

      Detach the 4 claws and remove the side defroster nozzle RH.

  9. REMOVE NO. 1 INSTRUMENT PANEL CUSHION


    1. Remove the No. 1 instrument panel cushion.

      B002L0V

  10. REMOVE NO. 2 INSTRUMENT PANEL CUSHION


    1. Remove the No. 2 instrument panel cushion.

      B002HCH

  11. REMOVE NO. 2 INSTRUMENT PANEL WIRE

    Click here

  12. REMOVE INSTRUMENT PANEL PASSENGER WITHOUT DOOR AIRBAG ASSEMBLY

    Click here

  13. REMOVE NAVIGATION ANTENNA ASSEMBLY WITH BRACKET

    Click here

  14. REMOVE INSTRUMENT PANEL WIRE


    1. for LHD:

      Detach the clamps and remove the instrument panel wire.

      B002HZS

    2. for RHD:

      Detach the clamps and remove the instrument panel wire.

      B002H4C

  15. REMOVE METER MIRROR SUB-ASSEMBLY (HEADUP DISPLAY) (w/ Headup Display)

    Click here

  16. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/ Headup Display)


    1. B002J6W

      Detach the 2 claws and 3 clips.

    2. Detach the 3 guides and remove the instrument cluster finish panel assembly.

  17. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH


    1. B002JNYC02
      *a Screw <A> or <B>

      Remove the 3 screws <A> or <B>.

    2. Detach the 2 clips and remove the No. 2 instrument cluster finish panel garnish.

  18. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL


    1. B002I60

      Remove the 4 screws and lower No. 2 instrument panel finish panel.