ROOF SUNSHADE SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE ROOF SUNSHADE SYSTEM

    Tech Tips

    The following item can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make notes of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with the GTS


      1. Turn the power switch off.

      2. Connect the GTS to the DLC3.

      3. Turn the power switch on (IG).

      4. Turn the GTS on.

      5. Enter the following menus: Customize Setting / Slide Roof.

      6. Select the setting by referring to the table below.


        Slide Roof
        Tester Display Description Default Setting ECU
        Front SW Auto Operation This function is used to enable or disable the auto operation. ON 0:OFF,1:ON Sliding roof drive gear sub-assembly