ROOM TEMPERATURE SENSOR REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE DOOR SCUFF PLATE ASSEMBLY LH

    Click here

  2. REMOVE COWL SIDE TRIM BOARD LH

    Click here

  3. REMOVE CONSOLE ARMREST ASSEMBLY

    Click here

  4. REMOVE UPPER REAR CONSOLE PANEL

    Click here

  5. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH

    Click here

  6. REMOVE INSTRUMENT SIDE PANEL LH

    Click here

  7. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  8. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  9. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

  10. REMOVE COOLER THERMISTOR (ROOM TEMPERATURE SENSOR)


    1. B002KY1

      Detach the 2 claws.

    2. Disconnect the connector.

    3. Disconnect the aspirator hose and remove the cooler thermistor (room temperature sensor).