PTC HEATER ASSEMBLY(for RHD) INSTALLATION

PROCEDURE

1. INSTALL QUICK HEATER ASSEMBLY

   
   

   1. 

      Install the quick heater assembly.

2. INSTALL HEATER COVER

   
   

   1. Install the heater cover with the screw.

   2. Attach the clamp and connect the 2 connectors.

3. INSTALL NO. 2 AIR DUCT

   
   

   1. Attach the 3 claws to install a new No. 2 air duct.

      Note

      If the No. 2 air duct is reused, it may fall off or abnormal noise may occur. Therefore, make sure to replace with a new one.

4. INSTALL LOWER INSTRUMENT PANEL

   Click here