FRONT SEAT INNER BELT ASSEMBLY(for Manual Seat) INSPECTION
PROCEDURE
-
INSPECT FRONT SEAT INNER BELT ASSEMBLY LH (for LHD)
-
w/ Seat Heater:
Measure the resistance according to the value(s) in the table below.
*1 Connector A *2 Connector B *3 Connector C *4 Connector D *a Component without harness connected
(Front Seat Inner Belt Assembly LH)
- - Standard Resistance Tester Connection Condition Specified Condition A-9 (E) - A-14 (RDC) Front seat belt unfastened 10 kΩ or higher Front seat belt fastened Below 1 Ω B-1 - C-3
B-2 - C-4
A-5 - D-6
A-6 - D-4
A-8 - D-2
A-10 - D-1
A-11 - D-5
Always Below 1 Ω If the result is not as specified, replace the front seat inner belt assembly LH.
-
w/o Seat Heater:
Measure the resistance according to the value(s) in the table below.
*1 Connector A *2 Connector B *3 Connector C - - *a Component without harness connected
(Front Seat Inner Belt Assembly LH)
- - Standard Resistance Tester Connection Condition Specified Condition A-9 (E) - A-14 (RDC) Front belt unfastened 10 kΩ or higher Front seat belt fastened Below 1 Ω B-1 - C-3
B-2 - C-4
Always Below 1 Ω If the result is not as specified, replace the front seat inner belt assembly LH.
-
-
INSPECT FRONT SEAT INNER BELT ASSEMBLY LH (for RHD)
-
w/ Seat Heater:
Measure the resistance according to the value(s) in the table below.
*1 Connector A *2 Connector B *3 Connector C *4 Connector D *a Component without harness connected
(Front Seat Inner Belt Assembly LH)
- - Standard Resistance Tester Connection Condition Specified Condition A-9 (E) - A-14 (RDC) Front passenger seat belt unfastened 10 kΩ or higher Front passenger seat belt fastened Below 1 Ω A-9 (E) - B-3 Front passenger seat belt unfastened Below 1 Ω Front passenger seat belt fastened 10 kΩ or higher A-15 (+) - B-1
A-5 - D-6
A-6 - D-4
A-8 - D-2
A-10 - D-1
A-11 - D-5
Always Below 1 Ω If the result is not as specified, replace the front seat inner belt assembly LH.
-
w/o Seat Heater:
Measure the resistance according to the value(s) in the table below.
*1 Connector A *2 Connector B *3 Connector C - - *a Component without harness connected
(Front Seat Inner Belt Assembly LH)
- - Standard Resistance Tester Connection Condition Specified Condition A-9 (E) - A-14 (RDC) Front passenger seat belt unfastened 10 kΩ or higher Front passenger seat belt fastened Below 1 Ω A-9 (E) - B-3 Front passenger seat belt unfastened Below 1 Ω Front passenger seat belt fastened 10 kΩ or higher A-15 (+) - B-1 Always Below 1 Ω If the result is not as specified, replace the front seat inner belt assembly LH.
-
-
INSPECT FRONT SEAT INNER BELT ASSEMBLY RH (for LHD)
-
w/ Seat Heater:
Measure the resistance according to the value(s) in the table below.
*1 Connector A *2 Connector B *3 Connector C *4 Connector D *a Component without harness connected
(Front Seat Inner Belt Assembly RH)
- - Standard Resistance Tester Connection Condition Specified Condition A-9 (E) - A-14 (RDC) Front passenger seat belt unfastened 10 kΩ or higher Front passenger seat belt fastened Below 1 Ω A-9 (E) - B-3 Front passenger seat belt unfastened Below 1 Ω Front passenger seat belt fastened 10 kΩ or higher A-15 (+) - B-1
A-5 - D-6
A-6 - D-4
A-8 - D-2
A-10 - D-1
A-11 - D-5
Always Below 1 Ω If the result is not as specified, replace the front seat inner belt assembly RH.
-
w/o Seat Heater:
Measure the resistance according to the value(s) in the table below.
*1 Connector A *2 Connector B *3 Connector C - - *a Component without harness connected
(Front Seat Inner Belt Assembly RH)
- - Standard Resistance Tester Connection Condition Specified Condition A-9 (E) - A-14 (RDC) Front passenger seat belt unfastened 10 kΩ or higher Front passenger seat belt fastened Below 1 Ω A-9 (E) - B-3 Front passenger seat belt unfastened Below 1 Ω Front passenger seat belt fastened 10 kΩ or higher A-15 (+) - B-1 Always Below 1 Ω If the result is not as specified, replace the front seat inner belt assembly RH.
-
-
INSPECT FRONT SEAT INNER BELT ASSEMBLY RH (for RHD)
-
w/ Seat Heater:
Measure the resistance according to the value(s) in the table below.
*1 Connector A *2 Connector B *3 Connector C *4 Connector D *a Component without harness connected
(Front Seat Inner Belt Assembly RH)
- - Standard Resistance Tester Connection Condition Specified Condition A-9 (E) - A-14 (RDC) Front seat belt unfastened 10 kΩ or higher Front seat belt fastened Below 1 Ω B-1 - C-3
B-2 - C-4
A-5 - D-6
A-6 - D-4
A-8 - D-2
A-10 - D-1
A-11 - D-5
Always Below 1 Ω If the result is not as specified, replace the front seat inner belt assembly RH.
-
w/o Seat Heater:
Measure the resistance according to the value(s) in the table below.
*1 Connector A *2 Connector B *3 Connector C - - *a Component without harness connected
(Front Seat Inner Belt Assembly RH)
- - Standard Resistance Tester Connection Condition Specified Condition A-9 (E) - A-14 (RDC) Front belt unfastened 10 kΩ or higher Front seat belt fastened Below 1 Ω B-1 - C-3
B-2 - C-4
Always Below 1 Ω If the result is not as specified, replace the front seat inner belt assembly RH.
-