SEAT BELT WARNING LIGHT(for Rear Side) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL AIR CONDITIONING CONTROL ASSEMBLY


    1. Connect the 2 connectors.

    2. B002KE3

      Attach the 6 clips to install the air conditioning control assembly (seat belt warning light).

      Note

      Do not touch the switch, display or clock parts.

  2. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

    Click here

  3. INSTALL NO. 2 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  4. INSTALL INSTRUMENT SIDE PANEL RH

    Click here

  5. INSTALL NO. 1 SWITCH HOLE BASE

    Click here

  6. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

  7. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  8. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  9. INSTALL INSTRUMENT SIDE PANEL LH

    Click here

  10. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH

    Click here

  11. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH

    Click here

  12. INSTALL UPPER REAR CONSOLE PANEL

    Click here

  13. INSTALL REAR CONSOLE ARMREST ASSEMBLY

    Click here

  14. INSTALL COWL SIDE TRIM BOARD LH

    Click here

  15. INSTALL DOOR SCUFF PLATE ASSEMBLY LH

    Click here

  16. INSTALL MULTI-DISPLAY ASSEMBLY

    Click here