SEAT BELT WARNING LIGHT(for Rear Side) REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY

   Click here

2. REMOVE REAR DECK FLOOR BOX (w/ Spare Tire)

   Click here

3. REMOVE DECK FLOOR BOX LH (w/ Spare Tire)

   Click here

4. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

5. REMOVE DOOR SCUFF PLATE ASSEMBLY LH

   Click here

6. REMOVE COWL SIDE TRIM BOARD LH

   Click here

7. REMOVE CONSOLE ARMREST ASSEMBLY

   Click here

8. REMOVE UPPER REAR CONSOLE PANEL

   Click here

9. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH

   Click here

10. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH

    Click here

11. REMOVE INSTRUMENT SIDE PANEL LH

    Click here

12. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

13. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

14. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

15. REMOVE NO. 1 SWITCH HOLE BASE

    Click here

16. REMOVE INSTRUMENT SIDE PANEL RH

    Click here

17. REMOVE NO. 2 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

18. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

    Click here

19. REMOVE AIR CONDITIONING CONTROL ASSEMBLY

    
    

    1. 

       Detach the 6 clips.

    2. Disconnect the connector and remove the air conditioning control assembly.