SEAT BELT WARNING SYSTEM(w/ Occupant Classification System) TERMINALS OF ECU


  1. CHECK COMBINATION METER ASSEMBLY

    A01H6BLN09

    1. Disconnect the I10 combination meter assembly connector.

    2. Measure the resistance and voltage according to the value(s) in the table below.

      Tester Connection Wiring Color Terminal Description Condition Specified Condition
      I10-21 (IG+) - Body ground B - Body ground IG power supply Power switch on (IG) → off 11 to 14 V → Below 1 V
      I10-22 (B) - Body ground Y - Body ground Battery power supply Power switch off 11 to 14 V
      I10-31 (ES) - Body ground W-B - Body ground Ground Always Below 1 Ω

  2. CHECK AIRBAG ECU ASSEMBLY

    B002KNFN50
    Terminal No. Terminal Symbol Destination
    Q23-15 LBE+ Front seat inner belt assembly LH
    Q23-23 LBE- Front seat inner belt assembly LH
    P23-9 FSR+ Occupant detection ECU
    P23-17 FSR- Occupant detection ECU

  3. CHECK OCCUPANT DETECTION ECU

    A01H7CYN14

    Tech Tips

    Since the occupant detection ECU uses waterproof connectors, the voltage and waveform cannot be inspected directly. Standard voltage readings and waveforms are indicated for reference only.

    Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
    f14-1 (SVC1) - f14-5 (SGD1) R - G Front occupant classification sensor LH power supply Power switch on (IG) 4.9 to 5.1 V
    f14-2 (SVC3) - f14-6 (SGD3) GR - W Rear occupant classification sensor LH power supply Power switch on (IG) 4.9 to 5.1 V
    f14-3 (SIG1) - f14-5 (SGD1) P - G Front occupant classification sensor LH signal Power switch on (IG) Pulse generation
    f14-4 (SIG3) - f14-6 (SGD3) SB - W Rear occupant classification sensor LH signal Power switch on (IG) Pulse generation
    f14-5 (SGD1) - f15-3 (GND) G - W-B Front occupant classification sensor LH ground Always Below 1 V
    f14-6 (SGD3) - f15-3 (GND) W - W-B Rear occupant classification sensor LH ground Always Below 1 V
    f15-1 (+B) - f15-3 (GND) W - W-B Power source (+B) Power switch off 11 to 14 V
    f15-2 (DIA) GR Diagnosis (DLC3) -* -*
    f15-3 (GND) - Body ground W-B - Body ground Ground Always Below 1 V
    f15-4 (FSR-) - f15-3 (GND) LG - W-B Airbag ECU assembly communication signal Always Below 1 V
    f15-5 (BGND) - f15-3 (GND) P - W-B Front Passenger side buckle switch ground Always Below 1 V
    f15-6 (IG2) - f15-3 (GND) B - W-B Power source (IG) Power switch on (IG) 11 to 14 V
    f15-7 (FSR+) - f15-4 (FSR-) L - LG Airbag ECU assembly communication signal Power switch on (IG) Pulse generation
    f15-8 (BSW) - f15-5 (BGND) G - P Front Passenger side buckle switch signal Always Pulse generation

    • *: As this is a line that is connected to other systems, voltage changes according to the systems that are connected.