LUMBAR SUPPORT ADJUSTER ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT LUMBAR SUPPORT ADJUSTER ASSEMBLY LH (for LHD)


    1. A01CQS1C02
      *a

      Component without harness connected

      (Lumbar Support Adjuster Assembly LH)

      Check the operation of the lumbar support adjuster assembly LH.


      1. Apply auxiliary battery voltage to the lumbar support adjuster assembly LH connector, and check that the lumbar support adjuster assembly LH operates smoothly as follows.

        OK
        Condition Specified Condition

        Auxiliary battery positive (+) → Terminal 1

        Auxiliary battery negative (-) → Terminal 2

        		 Forward

        Auxiliary battery positive (+) → Terminal 2

        Auxiliary battery negative (-) → Terminal 1

        		 Backward

        If the result is not as specified, replace the lumbar support adjuster assembly LH.

  2. INSPECT LUMBAR SUPPORT ADJUSTER ASSEMBLY RH (for RHD)


    1. A01CQS1C02
      *a

      Component without harness connected

      (Lumbar Support Adjuster Assembly RH)

      Check the operation of the lumbar support adjuster assembly RH.


      1. Apply auxiliary battery voltage to the lumbar support adjuster assembly RH connector, and check that the lumbar support adjuster assembly RH operates smoothly as follows.

        OK
        Condition Specified Condition

        Auxiliary battery positive (+) → Terminal 1

        Auxiliary battery negative (-) → Terminal 2

        		 Forward

        Auxiliary battery positive (+) → Terminal 2

        Auxiliary battery negative (-) → Terminal 1

        		 Backward

        If the result is not as specified, replace the lumbar support adjuster assembly RH.