REAR SEAT ASSEMBLY(for Power Seat) REASSEMBLY

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE


  1. INSTALL REAR SEAT WIRE LH (for LH Side)


    1. B002IB6

      Attach the 2 clamps to install the rear seat wire LH.

    2. Connect the 2 connectors.

  2. INSTALL FOLD SEAT CONTROL ECU (for LH Side)


    1. Install the fold seat control ECU.

    2. B002HST

      Connect the 2 connectors.

  3. INSTALL REAR SEATBACK PROTECTOR (for LH Side)


    1. B002JYE

      Install the rear seatback protector with the 2 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

  4. INSTALL REAR SEATBACK HOLDER (for LH Side)


    1. B002KXW

      Attach the 3 hooks to install the rear seatback holder.

  5. INSTALL RECLINING ADJUSTER INSIDE COVER LH (for LH Side)


    1. B002JXC

      Attach the 2 claws to install the reclining adjuster inside cover LH.

  6. INSTALL RECLINING ADJUSTER INSIDE COVER LH (for LH Side)


    1. B002H7G

      Attach the 2 claws to install the reclining adjuster inside cover LH.

  7. INSTALL SEAT COVER WIRE (for LH Side)


    1. B002HWYN02

      Install the seat cover wire.

      Tech Tips


      • Wire 1000 mm (3.28 ft.) or longer and shaped wire are available as supplied parts.

      • For wire 1000 mm (3.28 ft.) or less in length, cut or shape 1000 mm (3.28 ft.) wire into the dimensions shown in the illustration.

      • Make sure to read the precautions before preparing the wire.

        Click here

      Length
      A 120 mm (4.72 in.)
      B 180 mm (7.09 in.)

      Tech Tips

      The dimensions shown in the illustration are the lengths.

      B002KF7

  8. INSTALL SEPARATE TYPE REAR SEATBACK COVER LH (for LH Side)

    Tech Tips


    • When installing the seat cover, refer to the precautions in order to prevent wrinkles from forming.

      Click here

    • Align the seam allowance in a single direction as shown in the illustration.

      B002KOTN01

    1. B002IZBC01
      *1 Hog Ring Pliers

      Using hog ring pliers, install the separate type rear seatback cover LH to the separate type rear seatback pad LH with 12 new hog rings in the order indicated in the illustration.

      Note


      • Be careful not to damage the separate type rear seatback cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seatback cover.

  9. INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for LH Side)


    1. Install the separate type rear seatback cover with pad to the rear seatback frame sub-assembly LH.

  10. INSTALL REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY (for LH Side)


    1. B002KCEC01
      *a Protrusion

      Align the rear No. 1 seat headrest support assembly protrusions with the grooves in the rear seatback frame sub-assembly.

    2. Attach the 8 claws to install the 4 rear No. 1 seat headrest support assemblies.

    3. B002KQX

      Attach the 20 hooks.

  11. INSTALL REAR SEAT CUSHION MOULDING LH (for LH Side)


    1. B002JAWC01
      *1 Clamp
      *2 Guide

      Attach the guide and 7 claws to install the rear seat cushion moulding LH.

    2. Attach the clamp to connect the connector.

  12. INSTALL REAR SEAT CUSHION MOULDING LH (for LH Side)


    1. B002ICU

      Attach the guide and 7 claws to install the rear seat cushion moulding LH.

  13. INSTALL REAR NO. 1 SEAT CENTER ARMREST PLATE (for LH Side)


    1. B002KSG

      Install the rear No. 1 seat center armrest plate to the rear seat center armrest assembly.

  14. INSTALL NO. 1 SEATBACK COVER (for LH Side)


    1. B002H5Q

      Attach the 2 guides.

    2. Attach the 2 claws and clip to install the No. 1 seatback cover.

  15. INSTALL NO. 1 SEATBACK COVER (for LH Side)


    1. B002KHX

      Attach the guide and 4 claws to install the No. 1 seatback cover.

  16. INSTALL CENTER ARMREST HINGE COVER (for LH Side)


    1. B002IJ5

      Attach the 3 guides and 5 claws to install the center armrest hinge cover.

  17. INSTALL CENTER SEAT HINGE COVER (for LH Side)


    1. B002IES

      Attach the guide and 2 claws to install the center seat hinge cover.

  18. INSTALL NO. 1 SEAT ARMREST ASSEMBLY (for LH Side)


    1. B002KHM

      Install the No. 1 seat armrest assembly with the 2 nuts.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

  19. INSTALL CUP HOLDER ASSEMBLY (for LH Side)


    1. B002KLV

      Install the cup holder assembly with the 2 screws.

  20. INSTALL REAR SEAT CENTER ARMREST COVER (for LH Side)


    1. B002KD8

      Install the 2 rear seat center armrest covers.

  21. INSTALL REAR SEAT CENTER ARMREST ASSEMBLY (for LH Side)


    1. B002JTW

      Install the rear seatback protector shaft bush to the rear seat center armrest assembly.

    2. Rotate the rear seat center armrest assembly and insert the 2 pins as shown in the illustration to install the rear seat center armrest assembly.

      B002IYW

    3. Install the bolt and washer.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

  22. INSTALL REAR SEAT ARMREST HOLE COVER (for LH Side)


    1. B002KFV

      Attach the guide and 3 claws to install the rear seat armrest hole cover.

  23. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY LH (for LH Side)


    1. B002IVW

      Move the rear seatback board carpet assembly LH in the direction of the arrow to attach the 5 guides.

    2. Attach the 5 claws and 6 clips to install the rear seatback board carpet assembly LH.

    3. B002I7P

      Attach the 3 hooks.

  24. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY (for LH Side)


    1. Install the rear seat center headrest assembly.

  25. INSTALL REAR SEAT HEADREST ASSEMBLY RH (for LH Side)


    1. Remove the rear seat headrest assembly RH.

  26. INSTALL REAR SEAT CENTER LAP TYPE BELT ASSEMBLY LH (for LH Side)

    Click here

  27. INSTALL REAR SEAT INNER BELT ASSEMBLY LH (for LH Side)

    Click here

  28. INSTALL REAR SEAT WIRE RH (for RH Side)


    1. Attach the 2 clamps to install the rear seat wire RH.

    2. B002HU7

      Connect the 2 connectors.

  29. INSTALL FOLD SEAT CONTROL ECU (for RH Side)


    1. Install the fold seat control ECU.

    2. B002KLJ

      Connect the 2 connectors.

  30. INSTALL REAR SEATBACK PROTECTOR (for RH Side)


    1. B002IPP

      Install the rear seatback protector with the 2 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

  31. INSTALL RECLINING ADJUSTER INSIDE COVER RH (for RH Side)


    1. B002I8J

      Attach the 2 claws to install the reclining adjuster inside cover RH.

  32. INSTALL RECLINING ADJUSTER INSIDE COVER RH (for RH Side)


    1. B002INB

      Attach the 2 claws to install the reclining adjuster inside cover RH.

  33. INSTALL SEAT COVER WIRE (for RH Side)


    1. B002KCQN01

      Install the seat cover wire.

      Tech Tips


      • Wire 1000 mm (3.28 ft.) or longer and shaped wire are available as supplied parts.

      • For wire 1000 mm (3.28 ft.) or less in length, cut or shape 1000 mm (3.28 ft.) wire into the dimensions shown in the illustration.

      • Make sure to read the precautions before preparing the wire.

        Click here

      Length
      A 120 mm (4.72 in.)
      B 180 mm (7.09 in.)

      Tech Tips

      The dimensions shown in the illustration are the lengths.

      B002KF7

  34. INSTALL SEPARATE TYPE REAR SEATBACK COVER RH (for RH Side)

    Tech Tips


    • When installing the seat cover, refer to the precautions in order to prevent wrinkles from forming.

      Click here

    • Align the seam allowance in a single direction as shown in the illustration.

      B002JIFN01

    1. B002K9NC01
      *1 Hog Ring Pliers

      Using hog ring pliers, install the separate type rear seatback cover RH to the separate type rear seatback pad RH with 12 new hog rings in the order indicated in the illustration.

      Note


      • Be careful not to damage the separate type rear seatback cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seatback cover.

  35. INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for RH Side)


    1. Install the separate type rear seatback cover with pad to the rear seatback frame sub-assembly RH.

  36. INSTALL REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY (for RH Side)


    1. B002KZ6C01
      *a Protrusion

      Align the rear No. 1 seat headrest support assembly protrusions with the grooves in the rear seatback frame sub-assembly.

    2. Attach the 4 claws to install the 2 rear No. 1 seat headrest support assemblies.

    3. B002JQP

      Attach the 15 hooks.

  37. INSTALL REAR SEAT CUSHION MOULDING RH (for RH Side)


    1. B002JYSC01
      *1 Clamp
      *2 Guide

      Attach the guide and 7 claws to install the rear seat cushion moulding RH.

    2. Attach the clamp to connect the connector.

  38. INSTALL REAR SEAT CUSHION MOULDING RH (for RH Side)


    1. B002K5S

      Attach the guide and 7 claws to install the rear seat cushion moulding RH.

  39. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY RH (for RH Side)


    1. B002I0G

      Move the rear seatback board carpet assembly RH in the direction of the arrow to attach the 4 guides.

    2. Attach the 4 claws and 4 clips to install the rear seatback board carpet assembly RH.

    3. B002KF4

      Attach the 3 hooks.

  40. INSTALL REAR SEAT HEADREST ASSEMBLY RH (for RH Side)


    1. Remove the rear seat headrest assembly RH.

  41. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH (for RH Side)

    Click here

  42. INSTALL REAR SEATBACK COVER

    Tech Tips

    Use the same procedure for both rear seatback covers.


    1. B002HVL

      Attach the 4 claws to install the rear seatback cover.

  43. INSTALL SEAT ADJUSTER COVER CAP RH

    Tech Tips

    Use the same procedure for both seat adjuster cover caps.


    1. Install the seat adjuster cover cap RH.

  44. INSTALL SEAT COVER WIRE


    1. Install the seat cover wire.

      Tech Tips


      • Wire 1000 mm (3.28 ft.) or longer and shaped wire are available as supplied parts.

      • For wire 1000 mm (3.28 ft.) or less in length, cut or shape 1000 mm (3.28 ft.) wire into the dimensions shown in the illustration.

      • Make sure to read the precautions before preparing the wire.

        Click here

      B002IOBN01
      Length
      A 170 mm (6.69 in.) B 260 mm (10.2 in.)
      C 450 mm (1.48 ft.) D 300 mm (11.8 in.)

      Tech Tips

      The dimensions shown in the illustration are the lengths.

      B002KF7

  45. INSTALL BENCH TYPE REAR SEAT CUSHION COVER

    Tech Tips


    • When installing the seat cover, refer to the precautions in order to prevent wrinkles from forming.

      Click here

    • Align the seam allowance in a single direction as shown in the illustration.

      B002IPON01

    1. Using hog ring pliers, install the bench type rear seat cushion cover to the bench type rear seat cushion pad with 28 new hog rings in the order indicated in the illustration.

      B002HPRC01
      *1 Hog Ring Pliers - -

      Note


      • Be careful not to damage the bench type rear seat cushion cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the bench type rear seat cushion cover.

    2. B002ITAC01
      *1 Hog Ring Pliers

      Using hog ring pliers, install the bench type rear seat cushion cover with 39 new hog rings.

    3. B002K4PC01
      *1 Hog Ring Pliers

      Using hog ring pliers, install 6 new hog rings.

  46. INSTALL REAR POWER SEAT SWITCH

    Click here

  47. INSTALL SEAT ADJUSTER COVER CAP


    1. B002HJA

      Install the 2 seat adjuster cover caps.

  48. INSTALL REAR SEAT CUSHION EDGE PROTECTOR


    1. B002JC3

      Attach the claw to install the rear seat cushion edge protector.

  49. INSTALL REAR SEAT CUSHION LOCK HOOK

    Note


    • Perform the following only when replacing the rear seat cushion lock hook.

    • Do not reuse the rear seat cushion lock hook after removing it.

    Tech Tips

    Use the same procedure for the other side.


    1. Set a new rear seat cushion lock hook in place.

    2. B002J70C02
      *1 Protective Tape
      *2 Sleeve

      Using 2 thin-bladed screwdrivers, push the sleeve to attach the 2 claws.

      Note

      Do not apply excessive force which may break the sleeve.

      Tech Tips

      Tape the screwdriver tip before use.

    3. Check the installation condition.

      OK
      The sleeve is installed properly.
      B002IW3C01
      *1 Body *2 Vehicle
      *3 Sleeve - -
      *a Correct *b Incorrect