FRONT SEAT ASSEMBLY(for Power Seat) INSPECTION

PROCEDURE

1. INSPECT FRONT SEAT ADJUSTER ASSEMBLY LH (w/o Memory)

   
   

   1. for LHD, Driver Side:

      
      
      1. 

         *a	Component without wire harness connected (Front Seat Adjuster Assembly LH (Slide Motor))

         Check the operation of the slide motor.

         Apply auxiliary battery voltage to the slide motor connector, and check that the front seat adjuster assembly LH operates smoothly as follows.

         OK
         Condition Specified Condition Auxiliary battery positive (+) → Terminal 2 Auxiliary battery negative (-) → Terminal 1 Forward Auxiliary battery positive (+) → Terminal 1 Auxiliary battery negative (-) → Terminal 2 Backward

         If the result is not as specified, replace the front seat adjuster assembly LH.

      2. 

         *a	Component without wire harness connected (Front Seat Adjuster Assembly LH (Front Vertical Motor))

         Check the operation of the front vertical motor.

         Apply auxiliary battery voltage to the front vertical motor connector, and check that the front seat adjuster assembly LH operates smoothly as follows.

         OK
         Condition Specified Condition Auxiliary battery positive (+) → Terminal 2 Auxiliary battery negative (-) → Terminal 1 Forward Auxiliary battery positive (+) → Terminal 1 Auxiliary battery negative (-) → Terminal 2 Backward

         If the result is not as specified, replace the front seat adjuster assembly LH.

      3. 

         *a	Component without wire harness connected (Front Seat Adjuster Assembly LH (Rear Lifter Motor))

         Check the operation of the rear lifter motor.

         Apply auxiliary battery voltage to the rear lifter motor connector, and check that the front seat adjuster assembly LH operates smoothly as follows.

         OK
         Condition Specified Condition Auxiliary battery positive (+) → Terminal 2 Auxiliary battery negative (-) → Terminal 1 Upward Auxiliary battery positive (+) → Terminal 1 Auxiliary battery negative (-) → Terminal 2 Downward

         If the result is not as specified, replace the front seat adjuster assembly LH.

   2. for RHD, Front Passenger Side:

      
      
      1. 

         *a	Component without wire harness connected (Front Seat Adjuster Assembly LH (Slide Motor))

         Check the operation of the slide motor.

         Apply auxiliary battery voltage to the slide motor connector, and check that the front seat adjuster assembly LH operates smoothly as follows.

         OK
         Condition Specified Condition Auxiliary battery positive (+) → Terminal 2 Auxiliary battery negative (-) → Terminal 1 Forward Auxiliary battery positive (+) → Terminal 1 Auxiliary battery negative (-) → Terminal 2 Backward

         If the result is not as specified, replace the front seat adjuster assembly LH.

      2. 

         *a	Component without wire harness connected (Front Seat Adjuster Assembly LH (Front Vertical Motor))

         Check the operation of the front vertical motor.

         Apply auxiliary battery voltage to the front vertical motor connector, and check that the front seat adjuster assembly LH operates smoothly as follows.

         OK
         Condition Specified Condition Auxiliary battery positive (+) → Terminal 2 Auxiliary battery negative (-) → Terminal 1 Forward Auxiliary battery positive (+) → Terminal 1 Auxiliary battery negative (-) → Terminal 2 Backward

         If the result is not as specified, replace the front seat adjuster assembly LH.

      3. 

         *a	Component without wire harness connected (Front Seat Adjuster Assembly LH (Rear Lifter Motor))

         Check the operation of the rear lifter motor.

         Apply auxiliary battery voltage to the rear lifter motor connector, and check that the front seat adjuster assembly LH operates smoothly as follows.

         OK
         Condition Specified Condition Auxiliary battery positive (+) → Terminal 2 Auxiliary battery negative (-) → Terminal 1 Upward Auxiliary battery positive (+) → Terminal 1 Auxiliary battery negative (-) → Terminal 2 Downward

         If the result is not as specified, replace the front seat adjuster assembly LH.

2. INSPECT SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY LH (w/o Memory)

   
   

   1. for LHD, Driver Side:

      
      
      1. 

         *a	Component without wire harness connected (Separate Type Front Seatback Spring Assembly LH (Reclining Motor))

         Check the operation of the reclining motor.

         Apply auxiliary battery voltage to the reclining motor connector, and check that the separate type front seatback spring assembly LH operates smoothly as follows.

         OK
         Condition Specified Condition Auxiliary battery positive (+) → Terminal 2 Auxiliary battery negative (-) → Terminal 1 Forward Auxiliary battery positive (+) → Terminal 1 Auxiliary battery negative (-) → Terminal 2 Backward

         If the result is not as specified, replace the separate type front seatback spring assembly LH.

   2. for RHD, Front Passenger Side:

      
      
      1. 

         *a	Component without wire harness connected (Separate Type Front Seatback Spring Assembly LH (Reclining Motor))

         Check the operation of the reclining motor.

         Apply auxiliary battery voltage to the reclining motor connector, and check that the separate type front seatback spring assembly LH operates smoothly as follows.

         OK
         Condition Specified Condition Auxiliary battery positive (+) → Terminal 2 Auxiliary battery negative (-) → Terminal 1 Forward Auxiliary battery positive (+) → Terminal 1 Auxiliary battery negative (-) → Terminal 2 Backward

         If the result is not as specified, replace the separate type front seatback spring assembly LH.

3. INSPECT FRONT SEAT ADJUSTER ASSEMBLY RH (w/o Memory)

   
   

   1. for RHD, Driver Side:

      
      
      1. 

         *a	Component without wire harness connected (Front Seat Adjuster Assembly RH (Slide Motor))

         Check the operation of the slide motor.

         Apply auxiliary battery voltage to the slide motor connector, and check that the front seat adjuster assembly RH operates smoothly as follows.

         OK
         Condition Specified Condition Auxiliary battery positive (+) → Terminal 2 Auxiliary battery negative (-) → Terminal 1 Forward Auxiliary battery positive (+) → Terminal 1 Auxiliary battery negative (-) → Terminal 2 Backward

         If the result is not as specified, replace the front seat adjuster assembly RH.

      2. 

         *a	Component without wire harness connected (Front Seat Adjuster Assembly RH (Front Vertical Motor))

         Check the operation of the front vertical motor.

         Apply auxiliary battery voltage to the front vertical motor connector, and check that the front seat adjuster assembly RH operates smoothly as follows.

         OK
         Condition Specified Condition Auxiliary battery positive (+) → Terminal 2 Auxiliary battery negative (-) → Terminal 1 Forward Auxiliary battery positive (+) → Terminal 1 Auxiliary battery negative (-) → Terminal 2 Backward

         If the result is not as specified, replace the front seat adjuster assembly RH.

      3. 

         *a	Component without wire harness connected (Front Seat Adjuster Assembly RH (Rear Lifter Motor))

         Check the operation of the rear lifter motor.

         Apply auxiliary battery voltage to the rear lifter motor connector, and check that the front seat adjuster assembly RH operates smoothly as follows.

         OK
         Condition Specified Condition Auxiliary battery positive (+) → Terminal 2 Auxiliary battery negative (-) → Terminal 1 Upward Auxiliary battery positive (+) → Terminal 1 Auxiliary battery negative (-) → Terminal 2 Downward

         If the result is not as specified, replace the front seat adjuster assembly RH.

   2. for LHD, Front Passenger Side:

      
      
      1. 

         *a	Component without wire harness connected (Front Seat Adjuster Assembly RH (Slide Motor))

         Check the operation of the slide motor.

         Apply auxiliary battery voltage to the slide motor connector, and check that the front seat adjuster assembly RH operates smoothly as follows.

         OK
         Condition Specified Condition Auxiliary battery positive (+) → Terminal 2 Auxiliary battery negative (-) → Terminal 1 Forward Auxiliary battery positive (+) → Terminal 1 Auxiliary battery negative (-) → Terminal 2 Backward

         If the result is not as specified, replace the front seat adjuster assembly RH.

      2. 

         *a	Component without wire harness connected (Front Seat Adjuster Assembly RH (Front Vertical Motor))

         Check the operation of the front vertical motor.

         Apply auxiliary battery voltage to the front vertical motor connector, and check that the front seat adjuster assembly RH operates smoothly as follows.

         OK
         Condition Specified Condition Auxiliary battery positive (+) → Terminal 2 Auxiliary battery negative (-) → Terminal 1 Forward Auxiliary battery positive (+) → Terminal 1 Auxiliary battery negative (-) → Terminal 2 Backward

         If the result is not as specified, replace the front seat adjuster assembly RH.

      3. 

         *a	Component without wire harness connected (Front Seat Adjuster Assembly RH (Rear Lifter Motor))

         Check the operation of the rear lifter motor.

         Apply auxiliary battery voltage to the rear lifter motor connector, and check that the front seat adjuster assembly RH operates smoothly as follows.

         OK
         Condition Specified Condition Auxiliary battery positive (+) → Terminal 2 Auxiliary battery negative (-) → Terminal 1 Upward Auxiliary battery positive (+) → Terminal 1 Auxiliary battery negative (-) → Terminal 2 Downward

         If the result is not as specified, replace the front seat adjuster assembly RH.

4. INSPECT SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY RH (w/o Memory)

   
   

   1. for RHD, Driver Side:

      
      
      1. 

         *a	Component without wire harness connected (Separate Type Front Seatback Spring Assembly RH (Reclining Motor))

         Check the operation of the reclining motor.

         Apply auxiliary battery voltage to the reclining motor connector, and check that the separate type front seatback spring assembly RH operates smoothly as follows.

         OK
         Condition Specified Condition Auxiliary battery positive (+) → Terminal 2 Auxiliary battery negative (-) → Terminal 1 Forward Auxiliary battery positive (+) → Terminal 1 Auxiliary battery negative (-) → Terminal 2 Backward

         If the result is not as specified, replace the separate type front seatback spring assembly RH.

   2. for LHD, Front Passenger Side:

      
      
      1. 

         *a	Component without wire harness connected (Separate Type Front Seatback Spring Assembly RH (Reclining Motor))

         Check the operation of the reclining motor.

         Apply auxiliary battery voltage to the reclining motor connector, and check that the separate type front seatback spring assembly RH operates smoothly as follows.

         OK
         Condition Specified Condition Auxiliary battery positive (+) → Terminal 2 Auxiliary battery negative (-) → Terminal 1 Forward Auxiliary battery positive (+) → Terminal 1 Auxiliary battery negative (-) → Terminal 2 Backward

         If the result is not as specified, replace the separate type front seatback spring assembly RH.