CAUTION / NOTICE / HINT
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
Tech Tips
Use the same procedure for RHD and LHD vehicles.
The procedures listed below are for LHD vehicles.
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE
REMOVE FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side)
REMOVE FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side)
REMOVE SEAT ADJUSTER COVER CAP LH
Remove the 2 seat adjuster cover caps from the front seat adjuster assembly LH.
REMOVE FRONT LOWER SEAT CUSHION SHIELD
| *a | Claw A |
| *b | Claw B |
Remove the screw.
Detach the claw A.
Detach the clip, 2 claws B and guide, and then remove the front lower seat cushion shield.
REMOVE POWER SEAT SWITCH KNOB LH
Using moulding remover A, detach the 2 claws to remove the power seat switch knob LH.
REMOVE POWER SEAT SWITCH KNOB LH
Using moulding remover A, detach the 2 claws to remove the power seat switch knob LH.
REMOVE FRONT SEAT CUSHION SHIELD LH
Detach the 2 hooks to disconnect the 2 rubber bands.
Using moulding remover A, detach the claw.
Detach the clip and 4 guides to remove the front seat cushion shield LH.
| *1 | Wire Harness Cover |
for Driver Side, w/o Memory:
Detach the 3 claws to open the wire harness cover.
Detach the 3 clamps to disconnect the wire harness.
Disconnect the 2 connectors.
| *1 | Wire Harness Cover |
for Driver Side, w/ Memory:
Detach the 3 claws to open the wire harness cover.
Detach the 3 clamps to disconnect the wire harness.
Disconnect the 3 connectors.
| *1 | Wire Harness Cover |
for Driver Side, w/o Lumbar Support:
Detach the 3 claws to open the wire harness cover.
Detach the 3 clamps to disconnect the wire harness.
Disconnect the connector.
| *1 | Wire Harness Cover |
for Front Passenger Side:
Detach the 3 claws to open the wire harness cover.
Detach the 3 clamps to disconnect the wire harness.
Disconnect the connector.
REMOVE FRONT POWER SEAT SWITCH LH
REMOVE FRONT LUMBAR POWER SEAT SWITCH (w/ Lumbar Support)
REMOVE FRONT INNER SEAT CUSHION SHIELD LH
Using moulding remover A, detach the claw.
Detach the claw and 3 guides to remove the front inner seat cushion shield LH.
REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD LH (for L-Sport)
|
Fastening Tape |
Detach the fastening tape to disconnect the front seat side airbag wire harness.
w/ Seat Heater System:
Disconnect the connector.
Detach the clamp to disconnect the seat heater wire harness.
Disconnect the connector.
Detach the 3 clamps to disconnect the seat heater wire harness.
for Front Passenger Side:
Disconnect the occupant detection sensor connector.
Detach the 3 hooks.
Detach the 10 hooks.
| *1 | Protective Tape |
for Front Passenger Side:
Using a screwdriver, detach the claw to disconnect the occupant detection sensor connector.
Tech Tips
Tape the screwdriver tip before use.
Remove the separate type front seat cushion cover with pad LH.
REMOVE FRONT SEAT CUSHION WITH COVER PAD LH (for F-Sport)
|
Fastening Tape |
Detach the fastening tape to disconnect the front seat side airbag wire harness.
Disconnect the connector.
Detach the clamp to disconnect the seat heater wire harness.
| *1 | Connector Clamp |
| *2 | Wire Harness Clamp |
| *3 | Connector Lock |
Disconnect the connector.
Detach the clamp to disconnect the connector.
Detach the 3 clamps to disconnect the seat heater wire harness.
Remove the connector lock.
Disconnect the seat heater control connector.
for Front Passenger Side:
Disconnect the occupant detection sensor connector.
Detach the 2 hooks.
Detach the 10 hooks.
| *1 | Protective Tape |
for Front Passenger Side:
Using a screwdriver, detach the claw to disconnect the occupant detection sensor connector.
Tech Tips
Tape the screwdriver tip before use.
Remove the front seat cushion with cover pad LH.
REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER LH (for L-Sport)
Remove the 2 hog rings.
Remove the 14 hog rings.
Slide the seat cover wire.
Tech Tips
Use the same procedure for both seat cover wires.
Remove the 4 hog rings to remove the separate type front seat cushion cover LH from the separate type front seat cushion pad LH.
REMOVE SEAT COVER WIRE (for L-Sport)
Remove the seat cover wire.
REMOVE FRONT SEAT HEADREST SUPPORT
Detach the 2 pieces of fastening tape and pull out the 2 fasteners.
| *A | for L-Sport | *B | for F-Sport |
|
Fastening Tape | - | - |
Remove the 5 hog rings.
Open the 2 fasteners.
Detach the 4 claws to remove the 2 front seat headrest supports.
REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for L-Sport)
Remove the 2 nuts to disconnect the 3 seatback cover brackets.
w/ Climate Control Seat System:
Detach the 2 claws to disconnect the duct of the seatback climate control blower.
Remove the separate type front seatback cover with pad.
REMOVE FRONT SEATBACK WITH COVER PAD LH (for F-Sport)
Remove the 2 nuts to disconnect the 2 seatback cover brackets.
Detach the 2 claws to disconnect the duct of the seatback climate control blower.
Remove the front seatback with cover pad LH.
REMOVE SEPARATE TYPE FRONT SEATBACK COVER LH (for L-Sport)
Pass the 3 seatback cover brackets through the 3 holes of the separate type front seatback pad.
Remove the 14 hog rings to remove the separate type front seatback cover LH from the separate type front seatback pad.
REMOVE SEAT COVER WIRE (for L-Sport)
Remove the seat cover wire.
REMOVE SEATBACK FELT
Remove the seatback felt from the separate type front seatback spring assembly LH.
REMOVE FRONT SEAT AIRBAG ASSEMBLY LH
REMOVE FRONT NO. 2 SEAT WIRE LH
for LHD, Driver Side:
w/ Climate Control Seat System:
Disconnect the 4 connectors.
Detach the 8 clamps to remove the front No. 2 seat wire LH.
w/o Climate Control Seat System:
Disconnect the 3 connectors.
Detach the 4 clamps to remove the front No. 2 seat wire LH.
w/o Lumbar Support:
Disconnect the 2 connectors.
Detach the 2 clamps to remove the front No. 2 seat wire LH.
for RHD, Front Passenger Side:
w/ Climate Control Seat System:
Disconnect the 3 connectors.
Detach the 7 clamps to remove the front No. 2 seat wire LH.
w/o Climate Control Seat System:
Disconnect the 2 connectors.
Detach the 2 clamps to remove the front No. 2 seat wire LH.
REMOVE FRONT NO. 2 SEAT WIRE RH
for LHD, Front Passenger Side:
w/ Climate Control Seat System:
Disconnect the 3 connectors.
Detach the 7 clamps to remove the front No. 2 seat wire RH.
w/o Climate Control Seat System:
Disconnect the 2 connectors.
Detach the 2 clamps to remove the front No. 2 seat wire RH.
for RHD, Driver Side:
w/ Climate Control Seat System:
Disconnect the 4 connectors.
Detach the 8 clamps to remove the front No. 2 seat wire RH.
w/o Climate Control Seat System:
Disconnect the 3 connectors.
Detach the 4 clamps to remove the front No. 2 seat wire RH.
w/o Lumbar Support:
Disconnect the 2 connectors.
Detach the 2 clamps to remove the front No. 2 seat wire RH.
REMOVE SEATBACK CLIMATE CONTROL BLOWER LH (w/ Climate Control Seat System)
Using a clip remover, remove the clip.
Detach the 4 hooks to remove the seatback climate control blower LH.
REMOVE SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY LH
Remove the 4 bolts.
Detach the 4 guides to remove the separate type front seatback spring assembly LH from the front seat adjuster assembly LH.
REMOVE FRONT NO. 1 SEATBACK HOOK
Detach the 2 claws.
Remove the 2 front No. 1 seatback hooks from the lumbar support adjuster assembly LH.
REMOVE FRONT SEATBACK EDGE PROTECTOR
Detach the 2 claws and 4 guides to remove the 2 front seatback edge protectors.
REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY LH (w/ Lumbar Support)
REMOVE FRONT SEATBACK SPRING SUB-ASSEMBLY LH (w/o Lumbar Support)
Detach the 2 hooks to remove the front seatback spring sub-assembly LH from the front seatback frame sub-assembly LH.
REMOVE FRONT SEAT CUSHION AIRBAG ASSEMBLY RH (for Front Passenger Side)
REMOVE FRONT LOWER SEAT CUSHION SHIELD LH
| *1 | Clip B |
| *2 | Clip A |
Remove the clip A.
Detach the hook in the direction indicated by the arrow in the illustration.
Detach the clip B to remove the front lower seat cushion shield LH.
REMOVE FRONT LOWER SEAT CUSHION SHIELD RH
Remove the screw.
Detach the hook in the direction indicated by the arrow in the illustration.
Detach the clip to remove the front lower seat cushion shield RH.
REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH
| *1 | Clamp |
| *2 | Guide |
Detach the clamp and guide to remove the front seat cushion edge protector LH.
REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH
Tech Tips
Use the same procedure described for the LH side.
REMOVE SEAT CUSHION CLIMATE CONTROL DUCT LH (w/ Climate Control Seat System)
Detach the 2 claws to remove the seat cushion climate control duct LH from the seat cushion climate control blower assembly LH.
REMOVE SEAT CUSHION CLIMATE CONTROL BRACKET LH (w/ Climate Control Seat System)
Using a T20 "TORX" socket wrench, remove the 2 "TORX" screws and seat cushion climate control bracket LH.
REMOVE SEAT CUSHION CLIMATE CONTROL BLOWER ASSEMBLY LH (w/ Climate Control Seat System)
Disconnect the connector.
Detach the 2 hooks to remove the seat cushion climate control blower assembly LH.
REMOVE SEAT POSITION AIRBAG SENSOR (for Driver Side)
REMOVE FRONT SEAT CUSHION SPRING SUB-ASSEMBLY LH
w/ Climate Control Seat System:
Detach the clamp to disconnect the wire harness.
for Front Passenger Side:
Detach the clamp to disconnect the wire harness.
Detach the 6 hooks to remove the front seat cushion spring sub-assembly LH from the front seat adjuster assembly LH.
REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY LH (w/ Seat Heater System)
for L-Sport:
Disconnect the connector.
Detach the 2 clamps to remove the seat heater control sub-assembly LH.
for F-Sport:
Detach the clamp to remove the seat heater control sub-assembly LH.
REMOVE FRONT SEAT WIRE LH
Disconnect the 3 connectors.
Detach the claw to disconnect the connector.
Detach the 5 clamps to remove the front seat wire LH.
REMOVE FRONT SEAT WIRE RH
Disconnect the 3 connectors.
Detach the claw to disconnect the connector.
Detach the 5 clamps to remove the front seat wire RH.