CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY
Disconnect the I50 air conditioning amplifier assembly connector.
Measure the voltage and resistance according to the value(s) in the table below.
| Tester Connection | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| I50-1 (IG+) - Body ground | SB - Body ground | IG power supply | Power switch off | Below 1 V |
| Power switch on (IG) | 11 to 14 V | |||
| I50-14 (GND) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
| I50-21 (B) - Body ground | GR - Body ground | Battery power supply | Power switch off | 11 to 14 V |
Reconnect the I50 air conditioning amplifier assembly connector.
Check for pulses according to the value(s) in the table below.
| Tester Connection | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| I50-37 (LIN1) - Body ground | B - Body ground | Climate control switch signal (LIN) | Power switch on (IG) | Pulse generation |
| I54-10 (SVPB) - Body ground | GR - Body ground | Seat blower drive signal (for Front Passenger Side) |
|
Pulse generation (See waveform) |
| I54-11 (SVDB) - Body ground | Y - Body ground | Seat blower drive signal (for Driver Side) |
|
Pulse generation (See waveform) |
Waveform (Reference):
| Item | Content |
|---|---|
| Tester Connection | I54-10 (SVPB) - Body ground |
| Tool Setting | 1 V/DIV., 1 ms/DIV. |
| Vehicle Condition |
|
| Item | Content |
|---|---|
| Tester Connection | I54-11 (SVDB) - Body ground |
| Tool Setting | 1 V/DIV., 1 ms/DIV. |
| Vehicle Condition |
|
AIR CONDITIONING CONTROL ASSEMBLY