PRE-CRASH SAFETY SYSTEM FREEZE FRAME DATA


  1. CHECK FREEZE FRAME DATA


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Pre-Crash 2 / Trouble Codes.


      Body Electrical > Pre-Crash 2 > Trouble Codes

    5. According to the GTS display, select a DTC that stored freeze frame data.

    6. Read the freeze frame data recorded when the DTC was stored.


      Body Electrical > Pre-Crash 2
      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      PCS OFF Switch Pre-crash safety system switch status ON or OFF

      ON: Pre-crash safety system function disabled due to switch operation

      OFF: Pre-crash safety system function enabled due to switch operation

      		 -
      Pre-Crash System Pre-crash safety system control Valid or Inval

      Valid: Pre-crash safety system control possible

      Inval: Pre-crash safety system control not possible

      		 -
      PCS Indicator "Pre-crash Safety Malfunction Visit Your Dealer" display request signal ON or OFF

      ON: "Pre-crash Safety Malfunction Visit Your Dealer" display requested

      OFF: "Pre-crash Safety Malfunction Visit Your Dealer" display not requested

      		 -
      PCS Disabled Indicator "Pre-crash Safety Unavailable" display request signal ON or OFF

      ON: "Pre-crash Safety Unavailable" display requested

      OFF: "Pre-crash Safety Unavailable" display not requested

      		 -
      Pre-Crash Safety Warning Buz Pre-crash safety system warning buzzer Valid or Inval

      Valid: Pre-crash safety system warning buzzer operation possible

      Inval: Pre-crash safety system warning buzzer operation not possible

      		 -
      Pre-Crash Brake Pre-crash brake function Valid or Inval

      Valid: Pre-crash brake operation possible

      Inval: Pre-crash brake operation not possible

      		 -
      Rear Collision Detection - - - Not Supported
      Flushing Lamp Emergency stop light function Valid or Inval

      Valid: Emergency stop light operation possible

      Inval: Emergency stop light operation not possible

      		 -
      PBA Start Pre-crash brake assist activation signal OFF, Standby, Assist Lv1 or Assist Lv2

      OFF: Pre-crash brake assist not activated

      Standby: Pre-crash brake assist standby

      Assist Lv1: Pre-crash brake assist activated

      Assist Lv2: Pre-crash brake assist activated

      		 Signal status changes when the pre-crash brake assist is activated before a crash (Pre-crash brake will activate only in situations where the driver depresses the brake pedal)
      Warning Brake Warning brake operation ON or OFF

      ON: Warning brake operating

      OFF: Warning brake not operating

      		 -
      Brake Assist Standby Supplemental brake pressure signal ON or OFF

      ON: Supplemental brake pressure being provided

      OFF: Supplemental brake pressure not being provided

      		 Signal status changes when supplemental brake pressure is being provided after a crash is judged as unavoidable and before the brake pedal is depressed
      Pre-Crash Brake Control Pre-crash brake operational status ON or OFF

      ON: Pre-crash brake operating

      OFF: Pre-crash brake not operating

      		 Status changes when pre-crash safety brake operates before a crash
      AVS Start Adaptive variable suspension system control activation status ON or OFF

      ON: Adaptive variable suspension system control activated

      OFF: Adaptive variable suspension system control not activated

      		 Status changes when the suspension is controlled (stiffened) prior to a crash
      VGRS Start - - - Not Supported
      AHR Electricity Standby - - - Not Supported
      Face Direction - - - Not Supported
      Face Orientation Angle - - - Not Supported
      Driver Monitor voltage - - - Not Supported
      CCS Cancel Automatic cancellation of cruise control during pre-crash brake activation ON or OFF

      ON: Cruise control automatically canceled

      OFF: Cruise control not automatically canceled

      		 -
      Pre-Crash Safety Brake Ind Pre-crash safety system "BRAKE!" alert status ON or OFF

      ON: Pre-crash safety system "BRAKE!" alert on

      OFF: Pre-crash safety system "BRAKE!" alert off

      		 -
      PCS Crash Alarm Buzzer Skid control buzzer status ON or OFF

      ON: Skid control buzzer sounds

      OFF: Skid control buzzer does not sound

      		 -
      ORC Backlight - - - Not Supported
      Rear Radar Sensor Dirty - - - Not Supported
      Rear Radar Sens Temp Hi - - - Not Supported
      Rear Radar Voltage - - - Not Supported
      Rear Radar Wave Transmission - - - Not Supported
      Recog ECU H Temp Stop - - - Not Supported
      Recog ECU Recognize Img - - - Not Supported
      Recog ECU H Temp Hist - - - Not Supported
      Recognition Camera Images - - - Not Supported
      Recognition Camera Voltage - - - Not Supported