INNER REAR VIEW MIRROR(w/ EC Mirror) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/o Lane Departure Alert System)


    1. B002JJ5C04
      *a Screw
      *b Connector
      B002I10 Install in this Direction

      for LHD:


      1. Slide the inner rear view mirror assembly in the direction indicated by the arrow shown in the illustration to install the inner rear view mirror assembly.

      2. Using a T20 "TORX" socket wrench, install the screw.

        Torque:
        1.75 N*m  { 18 kgf*cm, 15 in.*lbf }

      3. Connect the connector.

    2. B002KO0C03
      *a Screw
      *b Connector
      B002I10 Install in this Direction

      for RHD:


      1. Slide the inner rear view mirror assembly in the direction indicated by the arrow shown in the illustration to install the inner rear view mirror assembly.

      2. Using a T20 "TORX" socket wrench, install the screw.

        Torque:
        1.75 N*m  { 18 kgf*cm, 15 in.*lbf }

      3. Connect the connector.

  2. INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/o Lane Departure Alert System)


    1. Attach the 6 claws.

    2. B002ILK

      Slide the inner rear view mirror stay holder cover in the direction indicated by the arrow shown in the illustration to install the inner rear view mirror stay holder cover.

  3. INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/ Lane Departure Alert System)


    1. B002IHVC04
      *a Screw
      *b Connector
      B002I10 Install in this Direction

      for LHD:


      1. Slide the inner rear view mirror assembly in the direction indicated by the arrow shown in the illustration to install the inner rear view mirror assembly.

      2. Using a T20 "TORX" socket wrench, install the screw.

        Torque:
        1.75 N*m  { 18 kgf*cm, 15 in.*lbf }

      3. Connect the connector and attach the clamp.

    2. B002IR5C04
      *a Screw
      *b Connector
      B002I10 Install in this Direction

      for RHD:


      1. Slide the inner rear view mirror assembly in the direction indicated by the arrow shown in the illustration to install the inner rear view mirror assembly.

      2. Using a T20 "TORX" socket wrench, install the screw.

        Torque:
        1.75 N*m  { 18 kgf*cm, 15 in.*lbf }

      3. Connect the connector and attach the clamp.

  4. INSTALL NO. 1 FORWARD RECOGNITION COVER (w/ Lane Departure Alert System)

    Click here

  5. INSTALL NO. 2 FORWARD RECOGNITION COVER (w/ Lane Departure Alert System)

    Click here