CLOCK SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZING WITH MULTI-DISPLAY (W/ TIME ZONE SETTING FUNCTION)


    1. Turn the power switch on (IG).

    2. Time zone setting


      1. Using the multi-display, select "Setup", "General", "Clock", and then time zone and change the customize setting.

        Item Default Content Setting Relevant ECU
        Time Zone Europe: Greenwich/South Africa: GMT+2/Southeast Asia: GMT+7/Near and Middle East: GMT+3/South America: GMT-3/Australia: East/Hong Kong: GMT+8/India: GMT+5.5 Time zone setting of clock West/Central/East/Greenwich/East/NewZealand/GMT+1/GMT+2/GMT+3/GMT+4/GMT+5.5/GMT+7/GMT+8/GMT+9/GMT-2/GMT-3/GMT-4/GMT-5/Other Radio receiver assembly
    3. Daylight saving time setting


      1. Using the multi-display, select "Setup", "General", "Clock", and then daylight saving time and change the customize setting.

        Item Default Content Setting Relevant ECU
        Daylight Saving Time OFF Setting for clock daylight saving time ON/OFF Radio receiver assembly
    4. Auto adjust by GPS setting


      1. Using the multi-display, select "Setup", "General", "Clock", and then auto adjust by GPS and change the customize setting.

        Item Default Content Setting Relevant ECU
        Auto Adjust by GPS On Setting for clock auto adjust by GPS ON/OFF Radio receiver assembly

        Tech Tips


        • If "ON" is selected, the clock will automatically be adjusted by the clock function of navigation system.

        • If "OFF" is selected, the clock can be manually adjusted.

    5. Manual clock setting


      1. Using the multi-display, select "Setup", "General", "Clock", select "auto adjust by GPS" to "OFF" and then hours and change the customize setting.

        Item Default Content Setting Relevant ECU
        Hours - Setting for manual clock adjustment of hour -/+/AM/PM Radio receiver assembly
      2. Using the multi-display, select "Setup", "General", "Clock", select "auto adjust by GPS" to "OFF" and then minutes and change the customize setting.

        Item Default Content Setting Relevant ECU
        Minutes - Setting for manual clock adjustment of minute -/+/:00 Radio receiver assembly

        Tech Tips

        If ":00" is selected, the minute value will be rounded up or down to the nearest hour.

  2. CUSTOMIZING WITH MULTI-DISPLAY (W/O TIME ZONE SETTING FUNCTION)


    1. Turn the power switch on (IG).

    2. Clock adjustment function


      1. Using the multi-display, select "Setup", "General", "Clock", and then auto adjust by GPS and change the customize setting.

        Item Default Content Setting Relevant ECU
        GPS synchronization On Setting for clock GPS synchronization ON/OFF Radio receiver assembly

        Tech Tips


        • This function is uses the navigation system clock function to automatically adjust the clock.

        • If "ON" is selected, the clock can be adjusted by using the offset mode.

        • If "OFF" is selected, the clock can be adjusted by using the clock correction mode.

    3. Clock adjustment function (offset mode)


      1. Using the multi-display, select "Setup", "General", "Clock", select "auto adjust by GPS" to "ON" and change the customize setting.

        Item Default Content Setting Relevant ECU
        Example: *Hours **Minutes increase No offset time (0 Hours 00 Minutes) Setting for the offset time after synchronizing the clock with GPS -/+ Radio receiver assembly

        Tech Tips


        • The offset time input is performed by selecting the "+" or "-" on the offset mode display. The offset time can be set up to 6 hours by using "+" and "-".

    4. Clock adjustment function (clock correction mode)


      1. Using the multi-display, select "Setup", "General", "Clock", select "auto adjust by GPS" to "OFF" and change the customize setting.

        Item Default Content Setting Relevant ECU
        Clock adjustment - Setting for manual clock adjustment H-/H+/M-/M+/:00 Radio receiver assembly

        Tech Tips


        • The hour hand can be adjusted by using the "+" and "-" clock adjustment H switches. The minute hand can be adjusted by using the "+" and "-" clock adjustment M switches.

        • If ":00" is selected, the minute value will be rounded up or down to the nearest hour.