HEADUP DISPLAY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL METER MIRROR SUB-ASSEMBLY (HEADUP DISPLAY)


    1. B002JM1C09
      *a Screw
      *b Connector

      Install the meter mirror sub-assembly (headup display) with the 4 screws.

    2. Connect the connector.

  2. INSTALL NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY


    1. Install the No. 1 heater to register duct sub-assembly with the 3 screws.

  3. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY

    Click here

  4. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here


    1. w/o Spare tire:

      Install the battery service cover and attach the 2 claws.

  5. ENABLE AUTOAWAY/RETURN FUNCTION (for Power Tilt and Power Telescopic Steering Column)


    1. Restore the autoaway/return function setting to the previous condition by changing the customize parameter.

      Click here

  6. CHECK SRS WARNING LIGHT

    Click here

  7. INSTALL DECK FLOOR BOX LH (w/ Spare Tire)

    Click here

  8. INSTALL REAR DECK FLOOR BOX (w/ Spare Tire)

    Click here

  9. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY (w/ Spare Tire)

    Click here