METER / GAUGE SYSTEM OPERATION CHECK

INSPECT INDICATOR/WARNING LIGHT

1. Check the following indicators and warning lights.

   Indicator/Warning Light	Switch Condition	Specified Condition
   Brake warning light	Power switch off → on (IG)	Comes on for 3 seconds
   Master warning light
   ABS warning light
   Slip indicator light
   VSC OFF indicator light
   PCS OFF warning light*1
   Automatic high beam indicator light*2
   Brake hold standby indicator light
   Brake hold operated indicator light
   Tire pressure warning light*3
   SRS warning light	Power switch off → on (IG)	Comes on for 6 seconds
   EPS warning light	Power switch off → on (IG)	Illuminates when power switch turned on (IG) Turns off when engine started
   MIL

   *1: w/ Pre-crash Safety System

   *2: w/ Automatic High Beam System

   *3: w/ Tire Pressure Warning System

INSPECT SPEEDOMETER

1. Connect the GTS to the DLC3.

2. Turn the power switch on (IG).

3. Turn the GTS on.

4. Enter the following menus: Powertrain / ABS/VSC/TRC / Data List.

   
   Chassis > ABS/VSC/TRC > Data List

   Tester Display	Measurement Item	Normal Condition	Reference Value	Diagnostic Note
   Vehicle Speed	Vehicle speed	Min.: 0 km/h (0 mph), Max.: 326 km/h (202 mph)	Almost same as actual vehicle speed	-

   
   Chassis > ABS/VSC/TRC > Data List

   Tester Display
   Vehicle Speed

   for km/h (except Australia)

   Standard Indication (km/h)	Acceptable Range (km/h)
   20	21 to 25
   40	41.7 to 46.2
   60	62.7 to 67.2
   80	83.4 to 88.4
   100	104.3 to 109.3
   120	125.1 to 130.6
   140	145.8 to 151.8
   160	166.2 to 173.2
   180	186.9 to 194.5
   200	207.7 to 215.7
   220	228.4 to 236.8
   240	249.2 to 258

   for km/h (for Australia)

   Standard Indication (km/h)	Acceptable Range (km/h)
   20	20.2 to 24.2
   40	40.4 to 44.9
   60	60.6 to 65.1
   80	80.8 to 85.8
   100	101 to 105
   120	121.2 to 126.2
   140	141.4 to 146.4
   160	161.6 to 166.6
   180	181.8 to 186.8
   200	202 to 207
   220	222.2 to 27.2
   240	242.4 to 247.4

   for mph

   Standard Indication (mph)	Acceptable Range (mph)
   20	21 to 2.5
   40	42 to 44.5
   60	62.5 to 66
   80	83.1 to 87.1
   100	103.9 to 108.4
   120	124.7 to 129.6
   140	145.4 to 150.7

   If the result is not as specified, the speedometer may have a malfunction.

   Note

   Do not use worn, underinflated or overinflated tires as the speedometer reading will be inaccurate.

5. Check the deflection width of the speedometer indicator.

   INSPECT TACHOMETER

   
   

   1. Connect a tune-up tachometer and start the engine.

   2. Compare the test results with the tachometer indicator.

   DC 13.5 V at 25°C (77°F)

   Standard Indication (rpm)	Acceptable Range Data in ( ) is for Reference (rpm)
   700	670 to 830
   1000	(900 to 1100)
   2000	(1850 to 2150)
   3000	2800 to 3200
   4000	(3800 to 4200)
   5000	4800 to 5200
   6000	(5750 to 6250)