GLOVE BOX LIGHT INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL GLOVE BOX LIGHT ASSEMBLY


    1. B002K1D

      Attach the 2 claws to install the glove box light assembly.

  2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY

    Click here

  3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here


    1. w/o Spare Tire:

      Install the battery service cover and attach the 2 claws.

  4. ENABLE AUTOAWAY/RETURN FUNCTION (for Power Tilt and Power Telescopic Steering Column)


    1. Restore the autoaway/return function setting to the previous condition by changing the customize parameter.

      Click here

  5. CHECK SRS WARNING LIGHT

    Click here

  6. INSTALL DECK FLOOR BOX LH (w/ Spare Tire)

    Click here

  7. INSTALL REAR DECK FLOOR BOX (w/ Spare Tire)

    Click here

  8. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY (w/ Spare Tire)

    Click here