GLOVE BOX LIGHT INSPECTION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSPECT GLOVE BOX LIGHT ASSEMBLY


    1. A01CO5IC14
      *a

      Component without harness connected

      (Glove Box Light Assembly)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → 2 (B)

      Battery negative (-) → 1 (L)

      		 Illuminates

      If the result is not as specified, replace the glove box light assembly.