VANITY LIGHT BULB REPLACEMENT

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. DISCONNECT VANITY LIGHT ASSEMBLY


    1. A01CNN6C01
      *1 Protective Tape

      Using a screwdriver, detach the claw and disconnect the vanity light assembly.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE VANITY LIGHT BULB


    1. A01CMT5

      Remove the vanity light bulb from the vanity light holder.

  3. INSTALL VANITY LIGHT BULB


    1. A01CPFF

      Install the vanity light bulb to the vanity light holder.

  4. CONNECT VANITY LIGHT ASSEMBLY


    1. A01CR5D

      Attach the claw to connect the vanity light assembly.