ELECTRICAL KEY OSCILLATOR(for Rear Floor) INSTALLATION

PROCEDURE


  1. INSTALL NO. 2 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY

    Note

    Do not reuse dropped or damaged parts.


    1. except China


      1. B002J4H

        Attach the clamp to install the No. 2 indoor electrical key antenna assembly.

    2. for China


      1. B002HH1

        Attach the clamp to install the No. 2 indoor electrical key antenna assembly.

  2. INSTALL NO. 2 CONSOLE BOX MOUNTING BRACKET


    1. except China


      1. B002KLC

        Temporarily install the No. 2 console box mounting bracket and connect the connector.

      2. B002HK9

        Temporarily install the 2 bolts and attach the clamp and clip.

      3. B002JLR

        Temporarily install the 2 bolts and attach the 4 claws.

      4. Attach the 2 clamps and clip.

      5. B002KOP

        Connect the connector and tighten the 4 bolts.

        Torque:
        8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

    2. for China


      1. B002HGP

        Temporarily install the No. 2 console box mounting bracket and connect the connector.

      2. B002JYI

        Temporarily install the 2 bolts and attach the clamp and clip.

      3. B002IMU

        Temporarily install the 2 bolts and attach the 4 claws.

      4. Attach the 2 clamps and clip.

      5. B002KOP

        Connect the connector and tighten the 4 bolts.

        Torque:
        8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

  3. INSTALL CONSOLE BOX ASSEMBLY

    Click here