ELECTRICAL KEY OSCILLATOR(for Rear Floor) REMOVAL

PROCEDURE


  1. REMOVE CONSOLE BOX ASSEMBLY

    Click here

  2. REMOVE NO. 2 CONSOLE BOX MOUNTING BRACKET


    1. B002KOP

      Disconnect the connector.

    2. except China


      1. B002JLR

        Detach the 2 clamps and clip.

      2. B002HK9

        Detach the 4 claws and remove the 2 bolts.

      3. Detach the clamp and clip.

      4. Remove the 2 bolts.

      5. B002KLC

        Disconnect the connector and remove the No. 2 console box mounting bracket.

    3. for China


      1. B002IMU

        Detach the 2 clamps and clip.

      2. B002JYI

        Detach the 4 claws and remove the 2 bolts.

      3. Detach the clamp and clip.

      4. Remove the 2 bolts.

      5. B002HGP

        Disconnect the connector and remove the No. 2 console box mounting bracket.

  3. REMOVE NO. 2 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY

    Note

    Do not reuse dropped or damaged parts.


    1. B002J4H

      except China


      1. Detach the clamp and remove the No. 2 indoor electrical key antenna assembly.

    2. B002HH1

      for China


      1. Detach the clamp and remove the No. 2 indoor electrical key antenna assembly.