INTRUSION SENSOR INSTALLATION

PROCEDURE

1. INSTALL THEFT WARNING ULTRASONIC SENSOR

   
   

   1. Attach the 4 clamps to install the theft warning ultrasonic sensor.

   2. Install the 6 screws and connect the connector.

2. INSTALL MAP LIGHT ASSEMBLY

   Click here

3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

4. INSTALL DECK FLOOR BOX LH (w/ Spare Tire)

   Click here

5. INSTALL REAR DECK FLOOR BOX (w/ Spare Tire)

   Click here

6. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY

   Click here

7. INSTALL DECK BOARD ASSEMBLY

   Click here