PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL
Note
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.
When disconnecting the cable from the negative (-) auxiliary battery terminal while performing repairs, some systems need to be initialized after the cable is reconnected
DOOR CONTROL RECEIVER EXPRESSIONS
The type of door control receiver used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.
| Vehicle Specification | Part Name in Manual | Actual Part Name |
|---|---|---|
| for 12 Pin Type | Door control receiver | Electrical key & TPMS receiver assembly |
| except 12 Pin Type | Door control receiver | Smart door control receiver assembly |
INTRUSION SENSOR EXPRESSIONS
The type of intrusion sensor used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.
| Vehicle Specification | Part Name in Manual | Actual Part Name |
|---|---|---|
| w/ Tilt Sensor | Theft warning ultrasonic sensor | Theft warning ultrasonic and tilt sensor |
| with Intrusion Sensor Cancel Switch, without Tilt Sensor | Theft warning ultrasonic sensor | Theft warning ultrasonic sensor |
PRECAUTION WHEN REPLACING THEFT WARNING ULTRASONIC SENSOR
When replacing the theft warning ultrasonic sensor, always replace it with a one having the same part number.