PANORAMIC VIEW MONITOR SYSTEM, Diagnostic DTC:C2A6C

DTC Code	DTC Name
C2A6C	Side Camera RH Response Malfunction

DESCRIPTION

During self diagnosis of the parking assist ECU, the parking assist ECU sends display mode ID signals to the side television camera assembly RH. This DTC is stored when the output of the side television camera assembly RH does not match the expected output.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area
C2A6C	Side Camera RH Response Malfunction	Abnormal response from the side television camera assembly RH	Side television camera assembly RH Parking assist ECU

CAUTION / NOTICE / HINT

Note

When "!" mark is displayed on the multi-display after the cable is disconnected from the negative (-) auxiliary battery terminal, correct the steering angle neutral point.

Click here
Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the panoramic view monitor system may be needed.

Click here

PROCEDURE

CHECK FOR DTC

Clear the DTCs.

Click here

Chassis > Panoramic View Monitor > Clear DTCs

Check for DTCs.

Click here

Chassis > Panoramic View Monitor > Trouble Codes

OK
DTC C2A6C is not output.

Result

Proceed to
OK
NG

USE SIMULATION METHOD TO CHECK Click here

REPLACE SIDE TELEVISION CAMERA ASSEMBLY RH

Replace the side television camera assembly RH with a new or normally functioning one.

Click here

Result

Proceed to
NEXT

CHECK FOR DTC

Clear the DTCs.

Click here

Chassis > Panoramic View Monitor > Clear DTCs

Check for DTCs.

Click here

Chassis > Panoramic View Monitor > Trouble Codes

OK
DTC C2A6C is not output.

Result

Proceed to
OK
NG

END (SIDE TELEVISION CAMERA ASSEMBLY RH IS DEFECTIVE)

REPLACE PARKING ASSIST ECU Click here