BLIND SPOT MONITOR SENSOR REMOVAL

CAUTION / NOTICE / HINT

Note


  • Avoid any impact to the blind spot monitor sensor.

  • Do not drop the blind spot monitor sensor. If it is dropped, replace it with a new one.

PROCEDURE


  1. REMOVE REAR BUMPER COVER

    Click here

  2. REMOVE BLIND SPOT MONITOR SENSOR LH


    1. Remove the clamp.

    2. B002HFYC02
      B002HVY Nut
      B002I10 Connector

      Disconnect the connector.

    3. B002JPB

      Remove the 3 nuts.

      Note

      If the removed nut is the same shape as that shown in the illustration, replace it the supplied replacement part.

    4. Remove the blind spot monitor sensor LH.

  3. REMOVE BLIND SPOT MONITOR SENSOR RH

    Tech Tips

    Use the same procedure described for the LH side.