INTELLIGENT CLEARANCE SONAR SYSTEM, Diagnostic DTC:C1611

DTC Code DTC Name
C1611 ECU Malfunction

DESCRIPTION

If the clearance warning ECU assembly detects an internal malfunction during self-diagnosis, DTC C1611 is stored.

DTC No. Detection Item DTC Detection Condition Trouble Area
C1611 ECU Malfunction

  • Sub-CPU abnormal signal

  • Mirror check abnormal

 Clearance warning ECU assembly

CAUTION / NOTICE / HINT

Note


  • After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.

    Click here

  • After replacing an ultrasonic sensor or the clearance warning ECU assembly, perform the necessary procedures (adjustment, calibration, initialization or registration).

    Click here

PROCEDURE


  1. CHECK FOR DTC


    1. Using the GTS, check for DTCs according to the prompts on the screen.

      Tech Tips

      After turning the power switch from off to on (IG), wait 3 seconds or more before checking for DTCs.


      Body Electrical > IPA/ICS/Clearance Sonar > Trouble Codes

    2. Clear the DTCs according to the screen on the GTS.


      Body Electrical > IPA/ICS/Clearance Sonar > Clear DTCs

    3. Recheck for DTCs.


      Body Electrical > IPA/ICS/Clearance Sonar > Trouble Codes
      Result
      Result Proceed to
      DTC C1611 is output A
      DTC C1611 is not output B

    A

    REPLACE CLEARANCE WARNING ECU ASSEMBLY for LHD: Click here for RHD: Click here

    B

    USE SIMULATION METHOD TO CHECK Click here