TELEPHONE ANTENNA INSTALLATION

PROCEDURE

1. INSTALL ROOF ANTENNA ASSEMBLY

   
   

   1. When reusing the roof antenna assembly:

      
      

      1. Install a new seal.

   2. 

      Attach the 3 claws and 3 guides to install the roof antenna assembly as indicated by the arrows in the order shown in the illustration.

   3. 

      Temporarily install the telephone antenna assembly to the vehicle.

   4. Install the washer, and then install the telephone antenna assembly with the bolt.

      Torque:

      9.5 N*m  { 97 kgf*cm, 84 in.*lbf }

   5. Connect the connector.

2. INSTALL ROOF HEADLINING ASSEMBLY

   Click here

3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

4. INSTALL DECK FLOOR BOX LH (w/ Spare Tire)

   Click here

5. INSTALL REAR DECK FLOOR BOX (w/ Spare Tire)

   Click here

6. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY

   Click here

7. INSTALL DECK BOARD ASSEMBLY

   Click here