PROCEDURE
INSTALL TELEMATICS TRANSCEIVER
INSTALL NO. 2 TELEPHONE BRACKET
Install the No. 2 telephone bracket with the bolt.
INSTALL NO. 1 TELEPHONE BRACKET
Install the No. 1 telephone bracket with the bolt.
INSTALL TELEMATICS TRANSCEIVER WITH BRACKET
Install the telematics transceiver with the 2 nuts.
Connect each connector and temporarily install the telematics transceiver with bracket by attaching the 2 guides of the telematics transceiver with bracket to the instrument panel.
Install the telematics transceiver with bracket with the 2 bolts.
INSTALL RADIO RECEIVER ASSEMBLY
INSTALL AIR CONDITIONING CONTROL ASSEMBLY
INSTALL UPPER REAR CONSOLE PANEL SUB-ASSEMBLY
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
INSTALL NO. 2 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
INSTALL NO. 1 SWITCH HOLE BASE
INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL
INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
INSTALL INSTRUMENT SIDE PANEL LH
INSTALL INSTRUMENT SIDE PANEL RH
INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH
INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH
INSTALL UPPER REAR CONSOLE PANEL
INSTALL CONSOLE ARMREST ASSEMBLY
INSTALL COWL SIDE TRIM BOARD RH (for RHD)
INSTALL DOOR SCUFF PLATE ASSEMBLY RH (for RHD)
CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
INSTALL DECK FLOOR BOX LH (w/ Spare Tire)
INSTALL REAR DECK FLOOR BOX (w/ Spare Tire)
INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY
INSTALL DECK BOARD ASSEMBLY