TELEMATICS TRANSCEIVER REMOVAL

PROCEDURE


  1. REMOVE DECK BOARD ASSEMBLY

    Click here

  2. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY

    Click here

  3. REMOVE REAR DECK FLOOR BOX (w/ Spare Tire)

    Click here

  4. REMOVE DECK FLOOR BOX LH (w/ Spare Tire)

    Click here

  5. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notice before proceeding with work.

    Click here

  6. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  7. REMOVE DOOR SCUFF PLATE ASSEMBLY RH (for RHD)

    Click here

  8. REMOVE COWL SIDE TRIM BOARD RH (for RHD)

    Click here

  9. REMOVE CONSOLE ARMREST ASSEMBLY

    Click here

  10. REMOVE UPPER REAR CONSOLE PANEL

    Click here

  11. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH

    Click here

  12. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH

    Click here

  13. REMOVE INSTRUMENT SIDE PANEL RH

    Click here

  14. REMOVE INSTRUMENT SIDE PANEL LH

    Click here

  15. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  16. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  17. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

  18. REMOVE NO. 1 SWITCH HOLE BASE

    Click here

  19. REMOVE NO. 2 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  20. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

    Click here

  21. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  22. REMOVE UPPER REAR CONSOLE PANEL SUB-ASSEMBLY

    Click here

  23. REMOVE AIR CONDITIONING CONTROL ASSEMBLY

    Click here

  24. REMOVE RADIO RECEIVER ASSEMBLY

    Click here

  25. REMOVE TELEMATICS TRANSCEIVER WITH BRACKET


    1. B002JOQ

      Remove the 2 bolts.

    2. Detach the 2 guides and remove the telematics transceiver with bracket.

    3. Disconnect each connector.

    4. B002H9K

      Remove the 2 nuts and telematics transceiver assembly.

  26. REMOVE NO. 1 TELEPHONE BRACKET


    1. B002HEU

      Remove the bolt and No. 1 telephone bracket.

  27. REMOVE NO. 2 TELEPHONE BRACKET


    1. B002IIA

      Remove the bolt and No. 2 telephone bracket.

  28. REMOVE TELEMATICS TRANSCEIVER