MULTI-DISPLAY INSTALLATION

PROCEDURE


  1. INSTALL MULTI-DISPLAY ASSEMBLY

  2. INSTALL MULTI-DISPLAY CONTROLLER BRACKET A


    1. for 8 Inch:


      1. B002JHZ

        Temporarily install the multi-display controller bracket A with the 2 screws.

      2. B002IOS

        Install the 2 screws and tighten the 2 screws used to temporarily install the bracket.

    2. for 10.3 Inch:


      1. B002HRO

        Temporarily install the multi-display controller bracket A with the 2 screws.

      2. B002JGR

        Install the 2 screws and tighten the 2 screws used to temporarily install the bracket.

  3. INSTALL MULTI-DISPLAY ASSEMBLY WITH BRACKET


    1. for 8 Inch:


      1. B002IGN

        Connect the 3 connector and attach the clamp.

      2. B002JKJ

        Set the 3 guides.

      3. B002KCY

        Move the multi-display assembly with bracket as shown in the illustration to attach the 2 clips.

      4. B002IUK

        Install the 2 bolts and multi-display assembly with bracket.

    2. for 10.3 Inch:


      1. B002K4V

        Connect the 3 connector and attach the clamp.

      2. B002KIF

        Set the 3 guides.

      3. B002JBX

        Move the multi-display assembly with bracket as shown in the illustration to attach the 2 clips.

      4. B002I46

        Install the 2 bolts and multi-display assembly with bracket.

  4. INSTALL INSTRUMENT PANEL FINISH PLATE

    Click here

  5. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  6. CHECK SRS WARNING LIGHT

    Click here

  7. INSTALL DECK FLOOR BOX LH (w/ Spare Tire)

    Click here

  8. INSTALL REAR DECK FLOOR BOX (w/ Spare Tire)

    Click here

  9. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY

    Click here

  10. INSTALL DECK BOARD ASSEMBLY

    Click here