MULTI-DISPLAY REMOVAL

PROCEDURE


  1. REMOVE DECK BOARD ASSEMBLY

    Click here

  2. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY

    Click here

  3. REMOVE REAR DECK FLOOR BOX (w/ Spare Tire)

    Click here

  4. REMOVE DECK FLOOR BOX LH (w/ Spare Tire)

    Click here

  5. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notice before proceeding with work.

    Click here

  6. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  7. REMOVE DOOR SCUFF PLATE ASSEMBLY RH (for RHD)

    Click here

  8. REMOVE COWL SIDE TRIM BOARD RH (for RHD)

    Click here

  9. REMOVE CONSOLE ARMREST ASSEMBLY

    Click here

  10. REMOVE UPPER REAR CONSOLE PANEL

    Click here

  11. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH

    Click here

  12. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH

    Click here

  13. REMOVE INSTRUMENT SIDE PANEL RH

    Click here

  14. REMOVE INSTRUMENT SIDE PANEL LH

    Click here

  15. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  16. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  17. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

  18. REMOVE NO. 1 SWITCH HOLE BASE

    Click here

  19. REMOVE NO. 2 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  20. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

    Click here

  21. REMOVE MULTI-DISPLAY ASSEMBLY WITH BRACKET


    1. A0001B7

      Remove the 2 bolts and detach the 2 clips.

    2. A0001VA

      Move the multi-display assembly with bracket in the direction indicated by the arrow shown in the illustration.

    3. A0000SW

      Disconnect each connector.

    4. Detach the clamp and remove the multi-display assembly with bracket.

  22. REMOVE MULTI-DISPLAY CONTROLLER BRACKET A


    1. A0001M5

      Remove the 3 screws.

    2. A0001MZ

      Remove the 2 screws and multi-display controller bracket A.

  23. REMOVE MULTI-DISPLAY ASSEMBLY