PANORAMIC VIEW MONITOR SYSTEM INITIALIZATION

INITIALIZE PANORAMIC VIEW MONITOR SYSTEM

1. When "System initialising" is displayed on the multi-display assembly, correct the steering angle neutral point using the following method.

   
   

   1. Fully turn the steering wheel to the left and right on flat ground.

      Note

      Memorizing the steering angle neutral point must be carried out with the power switch on (READY). Apply the parking brake, depress the brake pedal, check that the shift lever is in P, and ensure that the vehicle is not moving.

      Tech Tips

      
      

      • The "?" button is displayed at the same time as "System initialising". If the "?" button is selected, this method is displayed.

      
      

      • If the steering angle neutral point cannot be memorized by fully turning the steering wheel to the left and right perform Steering Angle Setting in Calibration.

        Click here