NAVIGATION SYSTEM PRECAUTION


  1. PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    After the power switch is turned off, the radio receiver assembly records various types of memory and settings. As a result, after turning the power switch off, be sure to wait for the time specified in the following table before disconnecting the cable from the negative (-) auxiliary battery terminal.

    Waiting Time before Disconnecting Cable from Negative (-) Auxiliary Battery Terminal
    System Name See Procedure
    Vehicle enrolled in telematics system (w/ Telematics Transceiver for G-BOOK) 6 minutes
    Vehicle not enrolled in telematics system (w/ Telematics Transceiver for G-BOOK) 1 minute

  2. Note


    • When replacing the radio receiver assembly or navigation ECU, always replace it with a new one.

      If a radio receiver assembly or navigation ECU which was installed to another vehicle is used, the following may occur:


      • A communication malfunction DTC may be stored.

      • The radio receiver assembly or navigation ECU may not operate normally.

    • After replacing the radio receiver assembly, if the "New software is not compatible with the system. Contact your dealer." on-screen message is displayed on the multi-display assembly, update the software of the navigation ECU.

    • After replacing the navigation ECU, if the "New software is not compatible with the system. Contact your dealer." on-screen message is displayed on the multi-display assembly, update the software of the radio receiver assembly.

    • When replacing the DCM (telematics transceiver), make sure to replace it with a new one. (w/ Telematics Transceiver)

    PRECAUTION FOR NAVIGATION SYSTEM


    1. If replacing the DCM (telematics transceiver), refer to Initialization of Repair Instruction. (w/ Telematics Transceiver except G-BOOK)

      Click here

  3. PRECAUTIONS FOR G-BOOK (w/ Telematics Transceiver for G-BOOK)


    1. The navigation ECU functions as the G-BOOK device and holds the G-BOOK ID.

      Note

      When replacing the navigation ECU or DCM (telematics transceiver), perform Vehicle Contract Setting.

      Click here

    2. Necessary data for the telematics system is stored in the radio receiver assembly and navigation ECU.

      Note

      Download necessary data after replacing the radio receiver assembly or navigation ECU.

      Click here