ASC ECU INSTALLATION

PROCEDURE


  1. INSTALL STEREO COMPONENT EQUALIZER ASSEMBLY


    1. Install the stereo component equalizer assembly with 2 nuts.

  2. INSTALL STEREO COMPONENT EQUALIZER ASSEMBLY WITH BRACKET


    1. B002K2N

      Connect all the connectors and temporarily install the stereo component equalizer assembly by attaching the 2 guides of the stereo component equalizer assembly with bracket to the instrument panel.

    2. Install the stereo component equalizer assembly with bracket with the 2 bolts.

  3. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET

    Click here

  4. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  5. CHECK SRS WARNING LIGHT

    Click here

  6. INSTALL DECK FLOOR BOX LH (w/ Spare Tire)

    Click here

  7. INSTALL REAR DECK FLOOR BOX (w/ Spare Tire)

    Click here

  8. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY

    Click here

  9. INSTALL DECK BOARD ASSEMBLY

    Click here