HARD DISK DRIVE INSTALLATION

PROCEDURE


  1. INSTALL HARD DISC


    1. B002JXS

      Push the hard disc in the direction of the arrow shown in the illustration to install it.

    2. B002J6E

      Install the cover in the direction of the arrow shown in the illustration to install it.

    3. Install the 3 screws.

  2. INSTALL NO. 1 RADIO BRACKET

    Click here

  3. INSTALL RADIO RECEIVER ASSEMBLY

    Click here

  4. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. INSTALL DECK FLOOR BOX LH (w/ Spare Tire)

    Click here

  6. INSTALL REAR DECK FLOOR BOX (w/ Spare Tire)

    Click here

  7. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY

    Click here

  8. INSTALL DECK BOARD ASSEMBLY

    Click here