BACK DOOR SPEAKER INSPECTION

PROCEDURE


  1. INSPECT REAR NO. 3 SPEAKER ASSEMBLY


    1. A01CP7OC45
      *a

      Component without harness connected

      (Rear No. 3 Speaker Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      for 10 Speakers:
      Tester Connection Condition Specified Condition
      1 - 2 Always 2.5 Ω
      for 14 Speakers:
      Tester Connection Condition Specified Condition
      1 - 2 Always 5.0 to 7.0 Ω

      If the result is not as specified, replace the rear No. 3 speaker assembly.