AUDIO AND VISUAL SYSTEM(for 8 Inch Display) TERMINALS OF ECU

STEREO COMPONENT AMPLIFIER ASSEMBLY (for Separate Type Amplifier)

Terminal No. (Symbol)	Wiring Color	Terminal Description	Condition	Specified Condition
P32-3 (GND) - Body ground	W-B - Body ground	Ground	Always	Below 1 Ω
P32-4 (WFL+) - P32-3 (GND)	B - W-B	Sound signal (Front Left)	Audio system playing	A waveform synchronized with sound signals is output
P32-5 (WFR+) - P32-3 (GND)	W - W-B	Sound signal (Front Right)	Audio system playing	A waveform synchronized with sound signals is output
P32-8 (RL+) - P32-3 (GND)	R - W-B	Sound signal (Rear Left)	Audio system playing	A waveform synchronized with sound signals is output
P32-9 (RR+) - P32-3 (GND)	B - W-B	Sound signal (Rear Right)	Audio system playing	A waveform synchronized with sound signals is output
P32-12 (FL+) - P32-3 (GND)	P - W-B	Sound signal (Front Left)	Audio system playing	A waveform synchronized with sound signals is output
P32-13 (FR+) - P32-3 (GND)	P - W-B	Sound signal (Front Right)	Audio system playing	A waveform synchronized with sound signals is output
P32-16 (+B2) - P32-3 (GND)	B - W-B	Power source (+B)	Power switch off	11 to 14 V
P32-18 (GND2) - Body ground	W-B - Body ground	Ground	Always	Below 1 Ω
P32-19 (WFL-) - P32-3 (GND)	Y - W-B	Sound signal (Front Left)	Audio system playing	A waveform synchronized with sound signals is output
P32-20 (WFR-) - P32-3 (GND)	R - W-B	Sound signal (Front Right)	Audio system playing	A waveform synchronized with sound signals is output
P32-23 (RL-) - P32-3 (GND)	W - W-B	Sound signal (Rear Left)	Audio system playing	A waveform synchronized with sound signals is output
P32-24 (RR-) - P32-3 (GND)	G - W-B	Sound signal (Rear Right)	Audio system playing	A waveform synchronized with sound signals is output
P32-27 (FL-) - P32-3 (GND)	V - W-B	Sound signal (Front Left)	Audio system playing	A waveform synchronized with sound signals is output
P32-28 (FR-) - P32-3 (GND)	R - W-B	Sound signal (Front Right)	Audio system playing	A waveform synchronized with sound signals is output
P47-1 (MUTE) - P32-3 (GND)	P - W-B	Mute signal	Power switch on (ACC), audio system playing	2.0 V or higher
			Audio system changing modes	Below 1 V
P47-2 (L-) - P32-3 (GND)	R - W-B	Sound signal (Left)	Audio system playing	A waveform synchronized with sound signals is output
P47-3 (L+) - P32-3 (GND)	W - W-B	Sound signal (Left)	Audio system playing	A waveform synchronized with sound signals is output
P47-4 (R-) - P32-3 (GND)	B - W-B	Sound signal (Right)	Audio system playing	A waveform synchronized with sound signals is output
P47-5 (R+) - P32-3 (GND)	G - W-B	Sound signal (Right)	Audio system playing	A waveform synchronized with sound signals is output
P47-6 (SLD) - Body ground	Shielded - Body ground	Shielded ground	Always	Below 1 Ω
P47-7 (TX-)	L	AVC-LAN communication signal	-	-
P47-8 (TX+)	R	AVC-LAN communication signal	-	-
P47-11 (SPD) - P32-3 (GND)	V - W-B	Vehicle speed signal	Power switch on (IG), wheel being rotated	Pulse generation
P47-12 (ACC) - P32-3 (GND)	P - W-B	Power source (ACC)	Power switch off	Below 1 V
			Power switch on (ACC)	11 to 14 V
P47-14 (II1-) - P32-3 (GND)	R - W-B	Voice signal	Voice guidance sounding	A waveform synchronized with voice signals is output
P47-15 (II1+) - P32-3 (GND)	G - W-B	Voice signal	Voice guidance sounding	A waveform synchronized with voice signals is output
P47-18 (SLD1) - Body ground	Shielded - Body ground	Shielded ground	Always	Below 1 Ω
P47-24 (TMUT) - P32-3 (GND)*	B - W-B	Mute signal	Power switch on (ACC), audio system playing	2.0 V or higher
			Audio system changing modes	Below 1 V

*: w/ Telematics Transceiver

MULTI-DISPLAY ASSEMBLY

*: w/ Parking Assist Monitor System

#: There is no wire color information

1. 

   *a	Waveform 1 (camera lens not covered, displaying image)
   *b	Waveform 2 (camera lens covered, blacking out screen)
   *c	Synchronization Signal
   *d	Video Waveform

   Reference (Oscilloscope waveform):

   
   

   1. Waveform 1 (camera lens is not covered, displaying an image)

      Item	Content
      Measurement terminal	I42-8 (V+) - I42-9 (V-)
      Measurement setting	200 mV/DIV., 50 μs./DIV.
      Condition	Power switch on (READY), shift position in R, camera lens not covered, displaying image

      Tech Tips

      
      

      • The video waveform changes according to the image sent by the television camera assembly.

      • The video waveform is constantly output when the power switch is on (ACC).

   2. Waveform 2 (camera lens is covered, blacking out the screen)

      Item	Content
      Measurement terminal	I42-8 (V+) - I42-9 (V-)
      Measurement setting	200 mV/DIV., 50 μs./DIV.
      Condition	Power switch on (READY), shift position in R, camera lens covered, blacking out screen

      Tech Tips

      
      

      • The video waveform changes according to the image sent by the television camera assembly.

      • The video waveform is constantly output when the power switch is on (ACC).

REMOTE OPERATION CONTROLLER ASSEMBLY (REMOTE TOUCH)

Terminal No. (Symbol)	Wiring Color	Terminal Description	Condition	Specified Condition
I71-1 (+B) - I71-10 (GND)	W - LA	Power source (+B)	Power switch off	11 to 14 V
I71-6 (ACC) - I71-10 (GND)	LG - LA	Power source (ACC)	Power switch on (ACC)	11 to 14 V
			Power switch off	Below 1 V
I71-8 (MO-)	W	Local bus communication signal	-	-
I71-9 (MO+)	L	Local bus communication signal	-	-
I71-2 (ILL+) - I71-10 (GND)	SB - LA	Illumination signal	Power switch on (IG), light control switch off → tail or head position	Below 1 V → 11 to 14 V
I71-10 (GND) - Body ground	LA - Body ground	Ground	Always	Below 1 Ω
I71-5 (ILL-) - I71-10 (GND)	L - LA	Illumination signal	Power switch on (IG), light control switch off → tail or head position (Light intensity is not max or min.)	Below 1 V → Pulse generation

DCM (TELEMATICS TRANSCEIVER) (w/ Telematics Transceiver for G-BOOK)

Click here

DCM (TELEMATICS TRANSCEIVER) (w/ Telematics Transceiver except G-BOOK)

Click here

AIR CONDITIONING CONTROL ASSEMBLY (CLOCK)

Click here