AUDIO AND VISUAL SYSTEM(for 8 Speakers) Display Signal Circuit between Multi-display and Radio Receiver

DESCRIPTION

The display image signal from the radio receiver assembly is sent to the multi-display assembly using a GVIF cable.

WIRING DIAGRAM

B002KE7E04
*a Multi-display Assembly
*b Radio Receiver Assembly
*c Video Signal (Digital)

PROCEDURE


  1. CHECK GVIF CABLE CONNECTOR


    1. Check if the GVIF cable connector between the radio receiver assembly and the multi-display assembly has any connection problems.

    2. Check that the screen display is normal.

      OK
      Screen display is normal.
      Result
      Proceed to
      OK
      NG

    OK

    USE SIMULATION METHOD TO CHECK Click here

    NG

  2. CHECK MULTI-DISPLAY ASSEMBLY


    1. Replace the multi-display assembly with a new or normally functioning one.

      Click here

    2. Check that the screen display is normal.

      OK
      Screen display is normal.
      Result
      Proceed to
      OK
      NG

    OK

    END (MULTI-DISPLAY ASSEMBLY IS DEFECTIVE)

    NG

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here