CLEARANCE WARNING ECU(for RHD) REMOVAL

PROCEDURE

1. PRECAUTION

   Note

   After turning the power switch off, waiting time maybe required before disconnecting the cable from the auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery terminal notice before proceeding with work.

   Click here

2. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY (w/ Spare Tire)

   Click here

3. REMOVE REAR DECK FLOOR BOX (w/ Spare Tire)

   Click here

4. REMOVE DECK FLOOR BOX LH (w/ Spare Tire)

   Click here

5. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

   Click here

6. REMOVE DOOR SCUFF PLATE ASSEMBLY RH

   Click here

7. REMOVE COWL SIDE TRIM BOARD RH

   Click here

8. REMOVE REAR CONSOLE ARMREST ASSEMBLY

   Click here

9. REMOVE UPPER REAR CONSOLE PANEL

   Click here

10. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH

    Click here

11. REMOVE INSTRUMENT SIDE PANEL RH

    Click here

12. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

13. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

14. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

15. REMOVE ECU INTEGRATION BOX RH

    Click here

16. REMOVE CLEARANCE WARNING ECU ASSEMBLY

    
    

    1. 

       Detach the 2 claws and remove the clearance warning ECU assembly.