BLIND SPOT MONITOR SYSTEM TERMINALS OF ECU


  1. BLIND SPOT MONITOR SENSOR LH (MASTER)

    B002I9JN13

    Terminal No.

    (Symbol)

    		 Wiring Color Terminal Description Condition Specified Condition
    V1-3 (BIND) - V1-10 (BLGD) B - W-B Blind spot monitor main switch (combination switch assembly) indicator signal Power switch on (IG), blind spot monitor main switch (combination switch assembly) on 11 to 14 V
    Power switch on (IG), blind spot monitor main switch (combination switch assembly) off Below 1 V
    V1-4 (OMIL) - V1-10 (BLGD) V - W-B Outer rear view mirror indicator LH power source signal Outer rear view mirror indicator LH illuminated 3.5 to 9.5 V
    Outer rear view mirror indicator LH blinks Alternating between 0 to 9.5 V
    Outer rear view mirror indicator LH not illuminated Below 1 V
    V1-5 (BLB) - V1-10 (BLGD) B - W-B IG power source signal Power switch off Below 1 V
    Power switch on (IG) 11 to 14 V
    V1-8 (BSSW) - V1-10 (BLGD) W - W-B Blind spot monitor main switch (combination switch assembly) indicator signal Power switch on (IG), blind spot monitor main switch (combination switch assembly) on 11 to 14 V
    Power switch on (IG), blind spot monitor main switch (combination switch assembly) off Below 1 V
    V1-10 (BLGD) - Body ground W-B - Body ground Ground Always Below 1 Ω

  2. BLIND SPOT MONITOR SENSOR RH (SLAVE)

    B002I9JN14

    Terminal No.

    (Symbol)

    		 Wiring Color Terminal Description Condition Specified Condition
    X1-3 (BUZ) - X1-10 (BRGD) G - W-B RCTA buzzer (blind spot monitor buzzer) operation signal RCTA buzzer (blind spot monitor buzzer) not sounding 11 to 14 V
    RCTA buzzer (blind spot monitor buzzer) sounding Alternating between 0 to 14 V
    X1-4 (OMIR) - X1-10 (BRGD) V - W-B Outer rear view mirror indicator RH power source signal Outer rear view mirror indicator RH illuminated 3.5 to 9.5 V
    Outer rear view mirror indicator RH blinks Alternating between 0 to 9.5 V
    Outer rear view mirror indicator RH not illuminated Below 1 V
    X1-5 (BRB) - X1-10 (BRGD) P - W-B IG power source signal Power switch off Below 1 V
    Power switch on (IG) 11 to 14 V
    X1-10 (BRGD) - Body ground W-B - Body ground Ground Always Below 1 Ω