FRONT SPEED SENSOR REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the LH side and RH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE FRONT TIRE

    Click here

  2. REMOVE FRONT SPEED SENSOR LH (w/ AVS)


    1. A01CO6X

      Disconnect the connector.

    2. Remove the bolt and sensor clamp from the steering knuckle.

    3. Remove the bolt and front speed sensor LH from the steering knuckle.

      Note

      Prevent foreign matter from attaching to the front speed sensor LH tip.

  3. REMOVE FRONT SKID CONTROL SENSOR WIRE LH (w/ AVS)


    1. A01CPTR

      Fold back the fender liner and disconnect the connector.

    2. A01CQ34

      Remove the clamp.

    3. Remove the bolt and sensor clamp from the side member.

    4. A01CMPUC02
      *1 Absorber Bracket

      Disconnect the connector from the absorber control actuator.

    5. Remove the grommet from the absorber bracket.

    6. A01CQUMC05
      *1 Absorber Bracket

      Remove the bolt, hook and sensor clamp.

    7. Remove the grommet from the absorber bracket.

  4. REMOVE FRONT SPEED SENSOR LH (w/o AVS)


    1. A01CPTR

      Fold back the fender liner and disconnect the connector.

    2. A01CQ34

      Remove the clamp.

    3. Remove the bolt and sensor clamp from the side member.

    4. A01CQPO

      Remove the clamp.

    5. Remove the bolt and sensor clamp from the absorber bracket.

    6. A01CQR4

      Remove the bolt and front speed sensor LH from the steering knuckle.

      Note

      Prevent foreign matter from attaching to the front speed sensor LH tip.