TIRE PRESSURE WARNING INITIATOR(for Rear Side) REMOVAL

PROCEDURE


  1. PRECAUTION

    CAUTION:

    Be sure to read precaution thoroughly before servicing.

    Click here

  2. REMOVE REAR WHEEL (for LH Side)

    Click here

  3. REMOVE QUARTER OUTSIDE MOULDING SUB-ASSEMBLY LH

    Click here

  4. REMOVE REAR BUMPER SIDE SEAL LH


    1. B002I04

      Remove the 2 clips and rear bumper side seal LH.

  5. REMOVE REAR WHEEL HOUSE FRONT PLATE LH


    1. B002JS3C01
      B002HVY Clip
      B002I10 Screw

      Remove the 2 clips, screw and rear wheel house front plate LH.

  6. REMOVE REAR WHEEL HOUSE LINER LH


    1. B002J7VC01
      B002HVY Clip (A)
      B002I10 Clip (B)

      Remove the 3 clips (A), 9 clips (B) and rear wheel house liner LH.

  7. REMOVE REAR TIRE PRESSURE MONITOR INITIATOR


    1. B002JAA

      Remove the service hole cover, and then disconnect the connector of the rear tire pressure monitor initiator.

    2. B002KQG

      Disconnect the grommet.

    3. Remove the 2 nuts and rear tire pressure monitor initiator.