TIRE PRESSURE WARNING RECEIVER(for RH Side) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.

    Click here

    Tech Tips

    The installation location of the tire pressure warning receiver differs depending on the vehicle. For more details about the installation location, refer to the following.

    Click here

  2. REMOVE DECK BOARD ASSEMBLY

    Click here

  3. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY

    Click here

  4. REMOVE REAR DECK FLOOR BOX (w/ Spare Tire)

    Click here

  5. REMOVE DECK FLOOR BOX LH (w/ Spare Tire)

    Click here

  6. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here


    1. w/o Spare Tire:

      Detach the 2 claws and remove the battery service cover.

  7. REMOVE REAR SEAT ASSEMBLY


  8. REMOVE TONNEAU COVER ASSEMBLY

    Click here

  9. REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY

    Click here

  10. REMOVE SPARE TIRE (w/ Spare Tire)

  11. REMOVE DECK FLOOR BOX LH (w/o Spare Tire)

    Click here

  12. REMOVE DECK FLOOR BOX RH (w/ Spare Tire)

    Click here

  13. REMOVE DECK FLOOR BOX RH (w/o Spare Tire)

    Click here

  14. REMOVE NO. 1 TOOL BOX SUB-ASSEMBLY (w/ Spare Tire)

    Click here

  15. REMOVE NO. 1 TOOL BOX SUB-ASSEMBLY (w/o Spare Tire)

    Click here

  16. REMOVE NO. 2 TOOL BOX SUB-ASSEMBLY (w/ Spare Tire)

    Click here

  17. REMOVE NO. 2 TOOL BOX SUB-ASSEMBLY (w/o Spare Tire)

    Click here

  18. REMOVE REAR FLOOR CARPET

  19. REMOVE REAR FLOOR FINISH PLATE (w/ Spare Tire)

    Click here

  20. REMOVE REAR FLOOR FINISH PLATE (w/o Spare Tire)

    Click here

  21. REMOVE BATTERY SERVICE COVER BOARD


  22. REMOVE NO. 1 SEAT LEG ASSEMBLY


  23. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Click here

  24. REMOVE ROPE HOOK ASSEMBLY

    Click here

  25. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY

    Click here

  26. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Click here

  27. REMOVE UPPER DECK TRIM SIDE BOARD RH

    Click here

  28. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH

    Click here

  29. REMOVE INNER ROOF SIDE GARNISH ASSEMBLY RH

    Click here

  30. REMOVE TIRE PRESSURE WARNING ECU AND RECEIVER


    1. B002ITZ

      Remove the bolt.

    2. Detach the 2 guides to remove the tire pressure warning ECU and receiver.

    3. Disconnect the connector from the tire pressure warning ECU and receiver.